Complementary
Analogue input type	Current 4...20 mA; Current 0...20 mA; Voltage 0...10 V; Voltage - 10...10 V
Analogue input resolution	12 bits; 11 bits + sign
Permissible continuous overload	13 V, analogue input type: voltage; 40 mA, analogue input type: current
Stabilisation time	1 ms
Input impedance	= 1 MOhm
Sampling duration	1 ms
Analogue output type	Current: 4...20 mA; Current: 0...20 mA; Voltage: 0...10 V; Voltage: - 10...10 V
Conversion time	1 ms + 1 ms per channel + 1 controller cycle time
Absolute accuracy error	+/- 1 % of full scale; +/- 0.2 % of full scale at 25 °C
Repeat accuracy	+/-0.5 %FS for input
Output ripple	20 mV
Type of cable	Twisted shielded pairs cable
Electrical connection	10 x 1.5 mm² removable spring terminal block with pitch 3.81 mm adjustment for inputs; 10 x 1.5 mm² removable spring terminal block with pitch 3.81 mm adjustment for inputs, outputs and supply
LSB value	2.44 mV, 0...10 V; 4.88 mV, - 10...10 V; 4.88 µA, 0...20 mA; 3.91 µA, 4...20 mA
Insulation	Between input and supply at 1500 V AC; Between input and internal logic at 500 V AC; Between output and supply at 1500 V AC; Between output and internal logic at 500 V AC
Immunity to microbreaks	10 ms
Load impedance ohmic	1 kOhm voltage; 300 Ohm current
load type	Resistive
Temperature drift	+/- 0.01 %FS/°C
Non-linearity	+/- 0.2 %FS
Typical current consumption	45 mA at 5 V DC no load; 55 mA at 5 V DC full load; 55 mA at 24 V DC no load; 100 mA at 24 V DC full load
Local signalling	1 LED green for PWR
Mounting support	Top hat type TH35-15 rail conforming to IEC 60715; Top hat type TH35-7.5 rail conforming to IEC 60715; plate or panel with fixing kit
Height	90 mm
Width	23.6 mm
Depth	70 mm
Net weight	0.1 kg
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP20
Marking	CE
Product certifications	CE; UKCA; RCM; EAC; CULus; CULus HazLoc
Standards	IEC 61131-2
Electromagnetic emission	Radiated emissions - test level: 40 dBμV/m QP class A ( 10 m) at 30…230 MHz conforming to IEC 55011; Radiated emissions - test level: 47 dBμV/m QP class A ( 10 m) at 230…1000 MHz conforming to IEC 55011
Ambient air temperature for operation	-10…55 °C (horizontal installation); -10…35 °C (vertical installation)
Ambient air temperature for storage	-25…70 °C
Relative humidity	10…95 % without condensation
Operating altitude	0...2000 m
Pollution degree	2
Vibration resistance	3.5 mm (f = 5…8.4 Hz) on DIN rail; 3 gn (f = 8.4…150 Hz) on DIN rail
Shock resistance	15 gn for 11 ms
Logistical informations
Country of origin	JP
Main
Range of product	Modicon TM3
Product or component type	Input/output analog module
Range compatibility	Modicon M221; Modicon M241; Modicon M251; Modicon M262
Analogue input number	4
Analogue output number	2
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	7.5 cm
Package 1 Width	12.5 cm
Package 1 Length	10.5 cm
Package 1 Weight	195.0 g
Unit Type of Package 2	S02
Number of Units in Package 2	9
Package 2 Height	15 cm
Package 2 Width	30 cm
Package 2 Length	40 cm
Package 2 Weight	2.294 kg
Unit Type of Package 3	P12
Number of Units in Package 3	144
Package 3 Height	75 cm
Package 3 Width	120 cm
Package 3 Length	80 cm
Package 3 Weight	46 kg

Analog input/output module Modicon TM3. For expanding Modicon M221, M241, M251 and M262 PLC controllers with I/O channels. Compatible with third-party controllers using Modicon TM3 bus couplers. A total of 6 analog I/Os, including 4 inputs (-10V to +10V / 0V to 10V / 0mA to 20mA / 4mA to 20mA) with 12-bit resolution, 2 outputs (-10V to +10V / 0V to 10V / 0mA to 20mA / 4mA to 20mA) with 12-bit resolution. Project planning and configuration using EcoStruxure Machine Expert software or standalone configurator (download from www.se.com). Connection via removable spring-loaded terminal blocks with 3.81mm pitch. Ambient temperature during operation -10°C to +55°C. Installation on 35mm DIN rail or directly on control panel with optional bracket. Certifications according to CE, cULus/CSA, EAC, RCM, cULus Hazardous Location.