| Complementary |
| Discrete I/O number | 24 |
| Maximum number of I/O expansion module | 7 (local I/O-Architecture); 14 (remote I/O-Architecture) |
| Supply voltage limits | 85…264 V |
| Network frequency | 50/60 Hz |
| Discrete input logic | Sink or source |
| Discrete input voltage | 24 V |
| Discrete input voltage type | DC |
| Voltage state 1 guaranteed | >= 15 V for input |
| Discrete input current | 5 mA for input |
| Input impedance | 4.7 kOhm for input |
| Response time | 50 µs turn-on, I0...I13 terminal(s) for input |
| Configurable filtering time | 1 s for fast input |
| Discrete output logic | Positive logic (source) |
| Output voltage limits | 125 V DC relay output; 30 V DC transistor output; 277 V AC relay output |
| Maximum output frequency | 1 kHz for transistor output; 20 kHz for fast output (PWM mode); 100 kHz for fast output (PLS mode) |
| Accuracy | +/- 0.1 % at 0.02…0.1 kHz for fast output; +/- 1 % at 0.1…1 kHz for fast output |
| Protection type | Short-circuit protection for transistor output; Short-circuit and overload protection with automatic reset for transistor output; Reverse polarity protection for transistor output; Without protection for relay output |
| Reset time | 10 ms automatic reset output; 12 s automatic reset fast output |
| Memory capacity | 64 MB for system memory RAM |
| Data backed up | 128 MB built-in flash memory for backup of user programs |
| Battery type | BR2032 lithium non-rechargeable, battery life: 4 year(s) |
| Backup time | 2 years at 25 °C |
| Execution time for 1 KInstruction | 0.3 ms for event and periodic task; 0.7 ms for other instruction |
| Application structure | 8 external event tasks; 3 cyclic master tasks + 1 freewheeling task; 8 event tasks; 4 cyclic master tasks |
| Realtime clock | With |
| Positioning functions | PTO function 4 channel(s) (positioning frequency: 100 kHz) |
| Counting input number | 4 fast input (HSC mode) at 200 kHz; 14 standard input at 1 kHz |
| Control signal type | A/B at 100 kHz for fast input (HSC mode); Pulse/direction at 200 kHz for fast input (HSC mode); Single phase at 200 kHz for fast input (HSC mode) |
| Integrated connection type | Non isolated serial link serial 1 with RJ45 connector and RS232/RS485 interface ; Non isolated serial link serial 2 with removable screw terminal block connector and RS485 interface ; USB port with mini B USB 2.0 connector; Ethernet with RJ45 connector |
| Supply | (serial 1)serial link supply: 5 V |
| Transmission rate | 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m for RS485; 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m for RS232; 480 Mbit/s for bus length of 3 m for USB; 10/100 Mbit/s for Ethernet |
| Communication port protocol | Non isolated serial link: Modbus master/slave |
| Port Ethernet | 10BASE-T/100BASE-TX - 1 port(s) copper cable |
| Local signalling | 1 LED (green) for PWR; 1 LED (green) for RUN; 1 LED (red) for module error (ERR); 1 LED (red) for I/O error (I/O); 1 LED (green) for SD card access (SD); 1 LED (red) for BAT; 1 LED (green) for SL1; 1 LED (green) for SL2; 1 LED (red) for bus fault on TM4 (TM4); 1 LED per channel (green) for I/O state; 1 LED (green) for Ethernet port activity |
| Electrical connection | removable screw terminal blockfor inputs and outputs (pitch 5.08 mm); removable screw terminal blockfor connecting the 24 V DC power supply (pitch 5.08 mm) |
| Maximum cable distance between devices | Unshielded cable: |
| Insulation | Between supply and internal logic at 500 V AC; Non-insulated between supply and ground |
| Marking | CE |
| Sensor power supply | 24 V DC at 400 mA supplied by the controller |
| Surge withstand | 2 kV power lines (AC) common mode conforming to IEC 61000-4-5; 2 kV relay output common mode conforming to IEC 61000-4-5; 1 kV shielded cable common mode conforming to IEC 61000-4-5; 1 kV power lines (AC) differential mode conforming to IEC 61000-4-5; 1 kV relay output differential mode conforming to IEC 61000-4-5; 1 kV input common mode conforming to IEC 61000-4-5; 1 kV transistor output common mode conforming to IEC 61000-4-5 |
| Web services | Web server |
| Maximum number of connections | 8 Modbus server; 8 SoMachine protocol; 10 web server; 4 FTP server; 16 Ethernet/IP target; 8 Modbus client |
| Number of server device(s) | 64 Modbus TCP: ; 16 EtherNet/IP: |
| Cycle time | 10 ms 16 EtherNet/IP; 64 ms 64 Modbus TCP |
| Mounting support | Top hat type TH35-15 rail conforming to IEC 60715; Top hat type TH35-7.5 rail conforming to IEC 60715; plate or panel with fixing kit |
| Height | 90 mm |
| Depth | 95 mm |
| Width | 150 mm |
| Net weight | 0.53 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | ANSI/ISA 12-12-01; CSA C22.2 No 142; CSA C22.2 No 213; IEC 61131-2:2007; Marine specification (LR, ABS, DNV, GL); UL 508 |
| Product certifications | RCM; cULus; CE; UKCA; DNV-GL; ABS; LR |
| Resistance to electrostatic discharge | 8 kV in air conforming to IEC 61000-4-2; 4 kV on contact conforming to IEC 61000-4-2 |
| Resistance to electromagnetic fields | 10 V/m 80 MHz...1 GHz conforming to IEC 61000-4-3; 3 V/m 1.4 GHz...2 GHz conforming to IEC 61000-4-3; 1 V/m 2 GHz...3 GHz conforming to IEC 61000-4-3 |
| Resistance to fast transients | 2 kV (power lines) conforming to IEC 61000-4-4; 2 kV (relay output) conforming to IEC 61000-4-4; 1 kV (Ethernet line) conforming to IEC 61000-4-4; 1 kV (serial link) conforming to IEC 61000-4-4; 1 kV (input) conforming to IEC 61000-4-4; 1 kV (transistor output) conforming to IEC 61000-4-4 |
| Resistance to conducted disturbances | 10 V 0.15...80 MHz conforming to IEC 61000-4-6; 3 V 0.1...80 MHz conforming to Marine specification (LR, ABS, DNV, GL); 10 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) conforming to Marine specification (LR, ABS, DNV, GL) |
| Immunity to microbreaks | 10 ms |
| Ambient air temperature for operation | -10…50 °C (vertical installation); -10…55 °C (horizontal installation) |
| Ambient air temperature for storage | -25…70 °C |
| Relative humidity | 10…95 %, without condensation (in operation); 10…95 %, without condensation (in storage) |
| IP degree of protection | IP20 with protective cover in place |
| Pollution degree | 2 |
| Operating altitude | 0...2000 m |
| Storage altitude | 0…3000 m |
| Vibration resistance | 3.5 mm at 5…8.4 Hz on symmetrical rail; 3 gn at 8.4…150 Hz on symmetrical rail; 3.5 mm at 5…8.4 Hz on panel mounting; 3 gn at 8.4…150 Hz on panel mounting |
| Shock resistance | 15 gn for 11 ms |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range of product | Modicon M241 |
| Product or component type | Logic controller |
| [Us] rated supply voltage | 100...240 V AC |
| Discrete input number | 14, discrete input 8 fast input conforming to IEC 61131-2 Type 1 |
| Discrete output type | Relay; Transistor |
| Discrete output number | 6 relay; 4 transistor 4 fast output |
| Discrete output voltage | 5...125 V DC for relay output; 5...250 V AC for relay output; 24 V DC for transistor output |
| Discrete output current | 2 A for relay output (Q4...Q9); 0.1 A for fast output (PTO mode) (TR0...TR3); 0.5 A for transistor output (TR0...TR3) |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 11.208 cm |
| Package 1 Width | 13.04 cm |
| Package 1 Length | 18.656 cm |
| Package 1 Weight | 760.0 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 8 |
| Package 2 Height | 30 cm |
| Package 2 Width | 30 cm |
| Package 2 Length | 40 cm |
| Package 2 Weight | 6.97 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 64 |
| Package 3 Height | 75.0 cm |
| Package 3 Width | 40.0 cm |
| Package 3 Length | 80.0 cm |
| Package 3 Weight | 66 kg |
The PLC controller
Modicon M241 from manufacturer
Schneider Electric, type
TM241CE24R, is a logic controller for automating compact, powerful, and networked industrial machines. It features a total of 24 integrated digital I/O, with 14 inputs (6 standard and 8 fast inputs at 200 kHz) and 10 outputs (6 relay and 4 transistor outputs). The fast inputs support the HSC mode (High-Speed Counter) with a maximum counting frequency of 200 kHz, making them suitable for precise position and speed measurements. The transistor outputs can be operated as fast outputs (PTO mode), with a maximum frequency of 100 kHz. The relay outputs are rated for voltages up to 125 V DC or 277 V AC and can each handle 2 A, while the transistor outputs deliver 0.5 A (standard) or 0.1 A (fast output). The inputs operate at 24 V DC with an input logic according to IEC 61131-2 Type 1, providing a guaranteed status-1 signal at 15 V and status-0 at 5 V. The input response time is 50 µs, and the filter time for fast inputs is configurable, starting at 1 µs.
Applications
The controller is designed for use in industrial applications, particularly in machine building, packaging technology, material handling, and other areas requiring a compact, powerful, and networked control system. The integrated positioning function with PTO (Pulse Train Output) enables control of up to 4 coordinated axes, with support for 2 axes including profiles such as trapezoidal or S-profile, and operating modes such as Pulse-Direction (P/D), CW/CCW, PWM, and FG. The maximum positioning frequency is 100 kHz. The controller is therefore suitable for applications with high dynamic and precision requirements.
Functions and Equipment in Detail
The controller features an integrated system memory of 64 MB RAM and a 128 MB flash memory for secure storage of user programs. The data retention period for stored data is 2 years at an ambient temperature of 25 °C. The execution time for a boolean instruction is 0.3 ms (for event and periodic tasks) or 0.7 ms (for other instructions). The application structure includes 8 external event tasks, 3 cyclic master tasks, and one free-running task. An integrated real-time clock is provided. The controller includes a slot for an SD card, which can be used for data exchange or programming. A USB-mini-B port enables programming and configuration. A Run/Stop switch and a QR code for direct access to technical documentation are also integrated.
Technology Explained Simply
The controller is powered by a supply voltage of 100 to 240 V AC, with supply voltage limits of 85 to 264 V. The network frequency is 50/60 Hz. The digital outputs are implemented as relay and transistor outputs, with transistor outputs featuring short-circuit and overload protection with automatic reset, as well as reverse polarity protection. Relay outputs have no protection. The reset time is 10 ms for outputs and 12 s for fast outputs. The controller supports integrated control for up to 4 coordinated axes. Positioning functions include PTO with a frequency of 100 kHz. The counting inputs support HSC mode with a frequency of 200 kHz.
Compatibility and Accessories
The controller is expandable with up to one plug-in module. Various modules are available for expansion, including plug-in modules for analog inputs (e.g. TMC4TI2, TMC4AI2) and outputs (TMC4AQ2), as well as special modules for crane and lifting applications (TMC4HOIS01). Local and decentralized I/O expansion is achieved via the Modicon TM3/TM5 I/O system. The maximum number of I/O expansion modules is 7 (local) or 14 (remote). The controller features a serial interface (Serial 1) with an RJ45 socket and RS232/RS485 interface, as well as a second serial interface (Serial 2) with a detachable screw terminal block and RS485 interface. The transmission speed is 1.2 to 115.2 kBit/s (default 115.2 kBit/s). The interfaces support Modbus ASCII/RTU in master/slave mode. Additionally, an Ethernet connection with an RJ45 socket is provided. Programming is done via the software
EcoStruxure Machine Expert, which can be downloaded from the website www.se.com. PLC programming follows
IEC 61131-3 in programming languages Structured Text (ST), Function Block Diagram (FBD/CFC), Instruction List (AWL), Ladder Diagram (KOP), or Sequential Function Chart (SFC) based on
CODESYS V3.
Mounting and Installation
The controller is connected via detachable screw terminal blocks. Mounting is either on a 35 mm DIN rail or directly on a control panel. The operating ambient temperature ranges from -10 °C to +55 °C. The controller is intended for use in non-hazardous areas, with certification for Class I, Division 2, Groups A, B, C, and D. Installation, commissioning, maintenance, and repair must only be performed by qualified personnel. Before mounting or maintenance, the entire system must be disconnected from the power supply, and de-energization must be verified using a calibrated voltage tester. After maintenance, all covers, cables, and connections must be re-secured, and grounding must be checked before power is restored.
Advantages in Operation
The controller offers high flexibility through the combination of integrated I/O, expandable modules, and various interfaces. The integrated positioning function enables drive control without additional hardware. Support for Modbus and Ethernet simplifies networking with other devices and systems. Programming via EcoStruxure Machine Expert and support for IEC 61131-3 ensure standardized and portable software development. The integrated real-time clock and 128 MB flash memory enable reliable data storage and backup. Certification according to CE, cULus, CSA, EAC, LR, ABS, DNV-GL, ODVA, and Achilles ensures compliance with international safety and quality standards.
The controller is designed for industrial environments and meets requirements for reliability, performance, and networking. The combination of compact design, powerful functions, and open interfaces makes it a versatile solution for modern automation tasks.