| Complementary |
| Number of port | 1 CAN port - screw terminal block; 1 USB type A - USB type A female; 1 USB type mini B - USB device port Mini-B; 2 RS485 - screw terminal block (Modbus serial link or BACnet MS/TP); 1 Ethernet - RJ45 (Modbus TCP and BACnet IP with webserver) |
| Input/output number | 8 digital input(s); 8 analog input(s); 4 analog output(s); 8 digital output(s) |
| Discrete input logic | Sink or source (positive/negative) |
| Discrete input voltage | 24 V AC/DC |
| Discrete input current | 2.5 mA |
| Input impedance | 10 kOhm |
| Sensor power supply | 5 V DC at 50 mA supplied by the controller; 24 V DC at 150 mA supplied by the controller |
| [Us] rated supply voltage | 24 V +/- 10 % AC; 20...38 V DC |
| Power consumption in W | 12 W at 24 V AC/DC |
| Realtime clock | Built-in clock, clock drift |
| Display type | Backlit LCD - 128 x 64 pixels |
| Overvoltage category | II |
| Local signalling | 1 LED (red) for programmable; 1 LED (yellow) for programmable; 1 LED (green) for programmable; 1 LED (green) for power |
| Mounting support | DIN rail; Panel mounting with accessory |
| Width | 144 mm |
| Height | 110 mm |
| Depth | 60.5 mm |
| Net weight | 0.3 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Directives | 2014/30/EU - electromagnetic compatibility; 2014/35/EU - low voltage directive |
| Standards | CAN/CSA-E60730-1; CSA E60730-2-9; EN 60068-2-27; EN 60068-2-6 Fc; EN 60730-1; EN 60730-2-9; UL 60730-1; UL 60730-2-9; IEC 61000-4-2; IEC 61000-4-3; IEC 61000-4-4; IEC 61000-4-5; IEC 61000-4-6; IEC 61000-4-11; UL94 (material V0) |
| Product certifications | EAC; CE; cURus; CSA; RCM |
| Ambient air temperature for operation | -20…65 °C conforming to UL 60730-1; -20…55 °C horizontal conforming to UL 60730-1 |
| Ambient air temperature for storage | -30…70 °C |
| Relative humidity | 5…95 % non-condensing |
| IP degree of protection | IP20 |
| Pollution degree | 2 |
| Operating altitude | 0...2000 m |
| Logistical informations |
| Country of origin | US |
| Main |
| Range of product | Modicon M171/M172 |
| Product or component type | Programmable controllers |
| Product specific application | HVAC control |
| Variant | Programmable |
| Total inputs/outputs | 28 |
| Discrete input number | 8 |
| Discrete output number | 1 for relay outputs SPDT with independent common; 3 for relay outputs SPST with same common; 2 for relay outputs SPST with same common; 2 for solid state, isolated SSR with independent common |
| Discrete output current | 3 A for relay SPDT; 3 A for relay SPST; 0.5 A for solid state, isolated |
| Analogue input number | 8 configurable by pair |
| Analogue output number | 2 voltage, range: 0...10 V; 2 voltage/current, range: 4...20 mA or 0...10 V or PWM (2 kHz) |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 13.500 cm |
| Package 1 Width | 9.000 cm |
| Package 1 Length | 19.000 cm |
| Package 1 Weight | 422.000 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 6 |
| Package 2 Height | 15.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 2.594 kg |
The Modicon M172 PLC controller in performance version is designed for every size of application in the field of HVAC machines and pump automation. Integrated and optional communication interfaces as well as Ethernet services offer extensive networking options. The integrated display and buttons allow control parameters to be set directly on the device. The controller has a total of 28 integrated I/Os, of which 8 are digital (potential-free / HSC 2 kHz) and 8 configurable (U/I/T/R) analog inputs, 8 digital &, 4 configurable (U/I/PWM) analog outputs. Integrated are two RS485 interfaces for Modbus SL Master/Slave (only 1 master) or 1 BACnet MS/TP (B-AAC profile), as well as an Ethernet interface for Modbus TCP Master/Slave &, BACnet IP (B-AAC profile), Ethernet (WebVisu, FTP, etc.). Program download possible via USB-A or Modbus SL. Available Ethernet services are remote access, HTTP web server (Webvisu), FTP client/server, SNPT. Slot for micro SD card on the front of the device for use for data recording and web server storage. Program transfer via memory stick via USB-A interface. Possibility of programming with PC via USB Mini-B interface. The power supply is via 24 VAC / 24 VDC. The digital outputs are designed as relays (3A). Two outputs are designed as semiconductor relays (SSR, 0.5A). The power supply and RS485 interface(s) are electrically isolated. The connections are made using removable screw terminal blocks (not included in delivery). Mounting on 35 mm top hat rail or mounting plate with fastening accessories. Is programmed with free EcoStruxure Machine Expert - HVAC software. Certified according to CE, cURus (UL recognized), CSA, EAC, RCM, RoHS China, BACnet BTL.