Batteries & Runtime Battery voltage +/- 192 V (split battery referenced to neutral) Extendable runtime 1 Included battery module 4 Empty battery slot 0 Typical recharge time 2.5 h RBC quantity 4 Battery life 3…5 year(s) Battery charging power 1530 W rated Complementary Additional information Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage Battery type Lead-acid internal included Free slot 0 Preinstalled device Network management card 2 with environmental monitoring UPS connectivity Serial port; Pre-installed network management card 3 Noise filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 Number of rack unit 12U Color Black Height 533 mm Width 432 mm Depth 773 mm Product weight 247.73 kg Mounting location Front Mounting preference Lower Mounting mode Rack-mounted Two post mountable 0 Provided equipment CD with software; Rack mounting support rails; Smart UPS signalling RS-232 cable; User manual; Web/SNMP management card Number of power module filled slots 0 Number of power module free slots 0 Range of product Smart-UPS On-Line Product or component type Uninterruptible power supply (UPS) Emergency power off Yes USB compatible No Redundant No Contractual warranty Warranty (in months) 24 Environment Product certification VDE Standard EN/IEC 62040-1:2019/A11:2021; EN/IEC 62040-2:2006/AC:2006; EN/IEC 62040-2:2018 Ambient air temperature for operation 0…40 °C Ambient air temperature for storage -15…45 °C Storage altitude 0…15240 m IP protection IP20 Relative humidity 0…95 % non-condensing Storage relative humidity 0…95 % non-condensing Acoustic level 50 dBA Heat dissipation 2800 Btu/h Operating altitude 0...10000 ft Graphs Run Time View Runtime Graph Logistical informations Country of origin PH Main Main input voltage 220 V AC 1 phase; 230 V AC 1 phase; 240 V AC 1 phase; 380 V AC 3 phases; 400 V AC 3 phases; 415 V AC 3 phases Other input voltage 220 V; 240 V Maximum input current 90 A Input harmonic distortion Less than 5 % for full load Load power factor 0.8 Cos phi 0.95 Switching current capacity 100 A Efficiency at full load 160...280 V Input current 90 A (1 phase); 30 A per phase (3 phases) Input connection 1 hard wire 3-wire (1P + N + E); 1 hard wire 5-wire (3P + N + E) Input frequency 40...70 Hz auto-sensing Output voltage 220 V AC 1 phase; 230 V 1 phase; 240 V 1 phase; 380 V 3 phases; 400 V 3 phases; 415 V 3 phases Other output voltage 220 V; 240 V Rated power in W 12000 W Rated power in VA 15000 VA Output connection 2 IEC Jumpers; 8 IEC 60320 Bypass type Built-in static bypass; Internal bypass (automatic and manual); Optional external bypass Crest factor 3 : 1 Harmonic distortion Less than 5 % Maximum configurable power in VA 15000 VA Maximum configurable power in W 12000 W Output overload operation 60 seconds at 125% and 30 seconds at 150% UPS topology On-Line Waveform type Sine wave Efficiency 93 % Output frequency 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 Hz sync to mains Replacement battery APCRBC140 Overview Presentation High density, double-conversion on-line power protection with scalable runtime. Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Height 99 cm Package 1 Width 61 cm Package 1 Length 100.3 cm Package 1 Weight 314.09 kg Unit Type of Package 2 PAL Number of Units in Package 2 2 Package 2 Height 112 cm Package 2 Width 100 cm Package 2 Length 120 cm Package 2 Weight 626.864 kg
Nicht zur Verwendung durch Verbraucher bestimmt. Hochleistungs-USV-Systeme mit Doppelwandler-Online-Technologie und skalierbarer Autonomiezeit. Beinhaltet: CD mit Software, Rack-Montageträgerschienen, intelligentes USV-Signalisierungskabel RS-232, User Manual, Web/SNMP-Managementkarte. Nicht für Verbraucher in der EU geeignet.