Further information for Schneider Electric STBEPI2145K kit parallel interface module TeSys-U 12I+8O
Complementary
Kit composition
Terminal spring clamp connector; STBXBA3000 base; Terminal screw type connector; STBEPI2145 module
Number of input channels
12
Input voltage
24 V
Input voltage type
DC
Input voltage limits
15...30 V at state 1; -3...5 V at state 0
Current state 1 guaranteed
>= 2 mA
Number of output channels
8
Output voltage
24 V
Output voltage type
DC
Protection type
Power protection integrated fuse on PDM time lag 10 A; Overload protection; Short-circuit protection; Input protection resistor-limited
hot swapping
Yes for standard NIMs
fallback
State 0 basic NIMs; User configurable standard NIMs
Electrical connection
4 RJ45 connectors
[Us] rated supply voltage
24 V DC
Supply
Power distribution module
Product compatibility
Power distribution module STBPDT3100/3105; Mounting base STBXBA3000
Marking
CE
Overvoltage category
II
Status LED
1 LED (green) module status (RDY); 1 LED (red) module error (ERR); 2 LEDs (green) switch position (S1 and S2); 4 LEDs (green) output status
Depth
170 mm
Height
28.1 mm
Width
128.3 mm
Net weight
0.165 kg
Cold swapping
Contractual warranty
Warranty (in months)
18
Environment
Product certifications
FM Class 1 Division 2; UL; CSA
Pollution degree
2 conforming to IEC 60664-1
IP degree of protection
IP20 conforming to IEC 61131-2 class 1
Ambient air temperature for operation
-25…70 °C (without derating)
Ambient air temperature for storage
-40…85 °C
Relative humidity
95 % at 60 °C without condensation
Vibration resistance
3 gn at 58…150 Hz on 35 x 7.5 mm symmetrical DIN rail; 5 gn at 58…150 Hz on 35 x 15 mm symmetrical DIN rail; +/-0.35 mm at 10…58 Hz
Shock resistance
30 gn for 11 ms conforming to IEC 88 reference 2-27
Logistical informations
Country of origin
ID
Main
Range of product
Modicon STB distributed I/O solution
Product or component type
Parallel interface kit
Product specific application
TeSys Quickfit; TeSys U
Packing Units
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
3.800 cm
Package 1 Width
8.200 cm
Package 1 Length
13.100 cm
Package 1 Weight
162.000 g
Unit Type of Package 2
S02
Number of Units in Package 2
20
Package 2 Height
15.000 cm
Package 2 Width
30.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
3.646 kg
Unit Type of Package 3
P06
Number of Units in Package 3
320
Package 3 Height
75.000 cm
Package 3 Width
60.000 cm
Package 3 Length
80.000 cm
Package 3 Weight
69.000 kg
The STBEPI2145K is a kit for a parallel interface module from the Advantys STB Decentralized I/O Platform by Schneider Electric. It serves as an interface for motor starters of the TeSys U and TeSys Quickfit types and enables decentralized processing of input and output signals in industrial control systems. The module is designed for use in automation systems where reliable and flexible communication between control and peripheral devices is required.
Applications
The interface module is designed for industrial applications, particularly in environments where TeSys U motor starters are used. It enables integration of 12 input channels and 8 output channels, with signals transmitted via a 24 V DC power supply. Compatibility with power distribution modules STBPDT3100/3105 and mounting base STBXBA3000 ensures easy installation and integration into existing systems. The operating temperature range of -25 °C to 70 °C without performance reduction makes it suitable for a wide range of industrial environments.
Functions and Equipment in Detail
The module features 12 input channels, detecting an input voltage of 15 to 30 V DC in state 1 and -3 to 5 V DC in state 0. The current at state 1 is at least 2 mA. The 8 output channels also supply 24 V DC. Protection functions include an integrated power protection with a delayed fuse of 10 A, overload protection, short-circuit protection, and input protection limited by a resistor. These functions enhance the reliability and safety of the module during operation.
Technology Explained Simply
The module operates with a rated voltage of 24 V DC and is powered via a power distribution module. Electrical connection is made through four RJ45 connectors, enabling a standardized and robust connection. The Cold Swapping and hot swapping (for standard NIMs) functions allow modules to be replaced without interrupting operation, thereby increasing system availability. The fallback function enables a safe reset to position 0 for base NIMs or a user-defined configuration for standard NIMs.
Compatibility and Accessories
The module is compatible with power distribution modules STBPDT3100/3105 and mounting base STBXBA3000. As an accessory, the I/O base STBXBA3000 TYP3 27 mm is available, enabling mounting of the module on a DIN rail. Using these components ensures a secure and standardized installation.
Mounting and Installation
The module is mounted on a symmetrical DIN rail, with vibration tolerance of 3 Gn (for 35 x 7.5 mm rail) and 5 gn (for 35 x 15 mm rail) at frequencies of 58 to 150 Hz. The shock resistance is 30 gn for 11 ms, ensuring suitability for use in vibrating environments. The protection rating IP20 corresponds to IEC 61131-2 Class 1, providing protection against finger contact and solid foreign objects. The storage temperature range is -40 °C to 85 °C.
Operational Advantages
LED status indicators provide visual monitoring of the module: a green LED indicates module status (RDY), a red LED indicates fault condition (ERR), two green LEDs indicate switch position (S1 and S2), and four green LEDs indicate output status. The overvoltage category II and pollution degree 2 (according to IEC 60664-1) ensure operation in environments with low to medium pollution. Certifications FM Class 1 Division 2, UL, and CSA confirm suitability for use in specific industrial environments.
Product Certifications
The module meets the requirements of certifications FM Class 1 Division 2, UL, and CSA, confirming its suitability for specific industrial applications. The protection rating IP20 and pollution degree 2 ensure safe and reliable operation in industrial environments.
Warranty
The warranty period is 18 months, underscoring the product’s reliability.
Dimensions and Weight
The module has a width of 128.3 mm, a height of 28.1 mm, and a depth of 170 mm. The product weight is 0.165 kg.
Packaging Units
Packaging units include PCE (1 unit), S02 (20 units), and P06 (320 units), with exact dimensions and weights of the packaging documented.