0 ms digital 40000 Hz counting inputs; 0.4 ms digital 1000 Hz counting inputs; 1.2 ms digital 400 Hz counting inputs; 2.5 µs analog counting inputs; 25 µs analog auxiliary input
Output voltage
24 V
Output voltage limits
19.2...30 V
Output voltage type
DC
nominal output current
0.5 A
Discrete output logic
Positive or negative configurable
Maximum leakage current
0.1 mA at state 0
Maximum load inductance
500 mH at 4 Hz
Protection type
Overload protection electronic tripping manual or automatic reset; Short-circuit protection electronic tripping manual or automatic reset; Overload protection current limiter; Short-circuit protection current limiter
Fallback status
Hold last value configured; State 0 for output channels by default; State 0 or 1 for each channel configured
Hot swapping fallback
Fallback output depending on parameter setting configured mandatory standard network interface module; Fallback to 0 not configured mandatory standard network interface module; Fallback to 0 basic network interface module
Product compatibility
Mounting base STBXBA3000; Power distribution module STBPDT3100/3105
[Us] rated supply voltage
24 V DC
Supply
Power distribution module
Current consumption
60...100 mA at 5 V DC for logic bus
Insulation between channels and bus
500 V
Marking
CE
Overvoltage category
II
Status LED
1 LED (green) EN validation input status (EN); 1 LED (green) module status (RDY); 1 LED (green) reset input status (RST); 1 LED per counting input (green) counting input status (INA, INB); 1 LED per output (green) output status (OUT1, OUT2); 1 LED (red) module error (FLT)
Height
28.1 mm
Depth
70 mm
Width
128.3 mm
DC supply voltage
24 V
Cold swapping
Contractual warranty
Warranty (in months)
18
Environment
Product certifications
FM Class 1 Division 2; CSA; UL
Pollution degree
2 conforming to IEC 60664-1
IP degree of protection
IP20 conforming to IEC 61131-2 class 1
Ambient air temperature for operation
-25…70 °C (without derating)
Ambient air temperature for storage
-40…85 °C
Relative humidity
95 % at 60 °C without condensation
Vibration resistance
3 gn at 58…150 Hz on 35 x 7.5 mm symmetrical DIN rail; 5 gn at 58…150 Hz on 35 x 15 mm symmetrical DIN rail; +/-0.35 mm at 10…58 Hz
Shock resistance
30 gn for 11 ms conforming to IEC 88 reference 2-27
Logistical informations
Country of origin
ID
Main
Range of product
Modicon STB distributed I/O solution
Product or component type
Counter kit
Number of channels
1
Kit composition
STBEHC3020 module; STBXBA3000 base; STBXTS215018 terminal spring clamp connector
Packing Units
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
3.400 cm
Package 1 Width
8.000 cm
Package 1 Length
13.200 cm
Package 1 Weight
163.000 g
Unit Type of Package 2
S02
Number of Units in Package 2
20
Package 2 Height
15.000 cm
Package 2 Width
30.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
3.763 kg
Modicon STB. Counter module. Kit counter module STB, 1 channel, 0-40000 Hz, 2/3-wire encoder, c 24 V, incremental encoder c 24 V, mechanically switching contacts. Channels 2.