Schneider Electric STBDRC3210K, EAN: 3595863949162

Schneider Electric STBDRC3210K output module digital 2DO REL Form C

Industrial Material > Industrial relays and contactors > Electronic modules

Schneider Electric STBDRC3210K output module digital 2DO REL Form C

Lieske Part No. 602927
Mfg Part No STBDRC3210K
EAN-Code 3595863949162
Manufacturer Schneider Electric
Here only 71,06 EUR
84,56 EUR incl. VAT

Further information for Schneider Electric STBDRC3210K output module digital 2DO REL Form C

Complementary
Discrete output current2000 mA
Response time on output< 10 ms off to on; < 10 ms on to off
Typical current consumption55 mA at 5 V DC
Electrical connectionScrew terminal
Height18.4 mm
Width128.3 mm
Depth70 mm
Net weight0.13 kg
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP20
MarkingCE
Product certificationsFM Class 1 Division 2; CSA; UL
StandardsIEC 61131-2
Relative humidity95 % at 60 °C without condensation
Pollution degree2
Shock resistance30 gn for 11 ms conforming to IEC 88 reference 2-27
Logistical informations
Country of originID
Main
Range of productModicon STB distributed I/O solution
Product or component typeStandard digital output kit
Kit compositionSTBXTS2110, 5-terminal spring clamp connector; STBXTS1100, 5-terminal screw type connector; STBXBA3000 base; STBDRC3210 module
Product compatibilityI/O base STBXBA2000; Power distribution module STBPDT3100/3105
Range compatibilityLogic/motion controller - Modicon M262; Modicon M580; Third party
Device applicationIndustrial application
Discrete output number2
Discrete output logicPositive logic (source)/negative logic (sink)
Discrete output voltage24 V AC for relay; 115...230 V DC
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height2.700 cm
Package 1 Width7.600 cm
Package 1 Length13.000 cm
Package 1 Weight150.000 g
Unit Type of Package 2S02
Number of Units in Package 228
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight4.617 kg
The product STBDRC3210K from Schneider Electric is a standard digital output kit from the Advantys STB Decentralized I/O platform. It serves as a digital output module for industrial control systems and enables the control of external loads such as relays, drives, or signal indicators. The kit is designed for use in PLC and motion control systems, particularly compatible with Modicon M262 and Modicon M580, as well as with systems from third-party manufacturers. It features two discrete outputs that can operate in both positive logic (Source) and negative logic (Sink), allowing for flexible integration into various circuits.

Applications
This module is designed for industrial applications where reliable and fast signal transmission is required. It is suitable, for example, for controlling machine components such as valves, motors, or lighting systems in production plants, manufacturing lines, or automation systems. Compatibility with various control systems allows for flexible integration into existing or new automation architectures.

Functions and Equipment in Detail
The STBDRC3210K kit includes the electronic module STBDRC3210, the module carrier STBXBA3000, and each type of connection technology in screw and spring-cage terminal versions: STBXTS1100 (screw terminal) and STBXTS2110 (spring-cage terminal). The two outputs support a voltage of 24 V AC for relays and 115 to 230 V DC. The maximum output current is 2,000 mA per channel, sufficient for driving high-power loads. The response time is 10 ms for both switching from off to on and vice versa, ensuring precise and time-critical control.

Technology Explained Simply
The outputs operate with positive logic (Source), where the output enables current flow to the load, and negative logic (Sink), where the output closes the current path to ground. This duality increases flexibility in circuit design. Power supply is via the network, with the module typically consuming 55 mA at 5 V DC. Electrical connections are made via screw terminals, ensuring a secure and mechanically stable connection. The protection rating IP20 means the device is protected against contact with fingers and against solid foreign objects, but not against splashing water or dust — therefore, it is intended for indoor use.

Compatibility and Accessories
The module is compatible with the I/O base unit STBXBA2000 and the voltage distribution module STBPDT3100/3105. It can be used in systems with Modicon M262, Modicon M580, and control systems from third-party manufacturers. As accessories, additional terminal strips such as the base I/O STBXBA3000 TYP3 27 mm, the STBXTS1100 6PT I/O screw connector set, and the STBXTS2110 I/O terminals 5-pole spring-cage are available to expand connection options.

Mounting and Installation
Mounting is done on the module carrier STBXBA3000, which is inserted into the base unit STBXBA2000. The terminal strips allow for easy and secure wiring. The mechanical robustness is designed for a shock resistance of 30 gn for 11 ms according to IEC 88 Note 2-27, ensuring a durable installation in industrial environments. The maximum relative humidity is 95 % at 60 °C, with condensation not permitted. Pollution degree 2 indicates that the device is suitable for environments with low pollution, as commonly found in industrial control enclosures.

Advantages in Operation
The STBDRC3210K offers high operational reliability due to its robust construction and fast response time. The combination of screw and spring-cage terminals included in the delivery allows flexible adaptation to different wiring situations. Conformity with the IEC 61131-2 standard ensures compliance with standards for industrial automation systems. Certifications including FM Class 1 Division 2, CSA, and UL highlight the safety and reliability of the module in various application environments. The warranty period is 18 months.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/602927
qrcode für Schneider Electric STBDRC3210K output module digital 2DO REL Form C