| Complementary |
| Output voltage | 19.2...30 V DC |
| Absolute maximum voltage | 56 V 1.3 ms |
| Discrete output current | 500 mA |
| Response time on output | 715 µs off to on; 955 µs on to off |
| Maximum leakage current | 0.4 mA 30 V DC at state 0 |
| Output protection type | Power protection integrated fuse on PDM time lag 10 A; Reverse polarity protection; Short-circuit protection; Thermal overload protection |
| Power supply type | Power distribution module |
| Typical current consumption | 90 mA at 5 V DC |
| Electrical connection | Screw terminal |
| Isolation between channels and bus | 1500 V for 1 minute |
| Fallback status | State 0 basic NIMs; User configurable standard NIMs |
| Surge current | 5 A 0.5 ms |
| Minimum load | 0.5 mA |
| Reset | Manual reset COM fault |
| Overvoltage category | II |
| Local signalling | 1 LED (green) for module status (RDY); 1 LED per channel (green) for channel status (OUT1 to OUT6) |
| Height | 13.9 mm |
| Width | 128.3 mm |
| Depth | 70 mm |
| Net weight | 0.114 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| IP degree of protection | IP20 |
| Marking | CE |
| Product certifications | CSA; UL; FM Class 1 Division 2 |
| Standards | IEC 61131-2 |
| Ambient air temperature for operation | 0…60 °C (without derating) |
| Ambient air temperature for storage | -40…85 °C without derating |
| Relative humidity | 95 % at 60 °C without condensation |
| Pollution degree | 2 |
| Vibration resistance | 3 gn (f = 58…150 Hz) on 35 x 7.5 mm symmetrical DIN rail; 5 gn (f = 58…150 Hz) on 35 x 15 mm symmetrical DIN rail; +/-0.35 mm (f = 10…58 Hz) |
| Shock resistance | 30 gn for 11 ms conforming to IEC 88 reference 2-27 |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range of product | Modicon STB distributed I/O solution |
| Product or component type | Standard digital output kit |
| Kit composition | STBXBA1000 base; STBDDO3600 module; STBXTS2100, 6-terminal spring clamp connector; STBXTS1100, 6-terminal screw type connector |
| Product compatibility | Power distribution module STBPDT3100/3105; I/O base STBXBA1000 |
| Range compatibility | Logic/motion controller - Modicon M262; Modicon M580; Third party |
| Device application | Industrial application |
| Discrete output number | 6 |
| Discrete output logic | Positive logic (source)/negative logic (sink) |
| Discrete output voltage | 24 V DC for solid state |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 2.7 cm |
| Package 1 Width | 8.0 cm |
| Package 1 Length | 13.0 cm |
| Package 1 Weight | 136.0 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 28 |
| Package 2 Height | 40 cm |
| Package 2 Width | 30 cm |
| Package 2 Length | 15 cm |
| Package 2 Weight | 4.425 kg |
Modicon STB. Digital output modules. Kit dig. Output module standard STB, 24 V DC, 0.5 A. Channels 6, type S. Scope of delivery of the kit order designations. xxxxK contains the electronic module, the module carrier and the corresponding connection technology, one each in screw and spring-loaded terminal versions.