Schneider Electric STBDDO3410K, EAN: 3595863989298

Schneider Electric STBDDO3410K output module digital 4DO 24 VDC

Industrial Material > Industrial relays and contactors > Electronic modules

Schneider Electric STBDDO3410K output module digital 4DO 24 VDC

Lieske Part No. 610050
Mfg Part No STBDDO3410K
EAN-Code 3595863989298
Manufacturer Schneider Electric
Here only 79,12 EUR
94,15 EUR incl. VAT

Further information for Schneider Electric STBDDO3410K output module digital 4DO 24 VDC

Complementary
Output voltage19.2...30 V DC
Absolute maximum voltage56 V 1.3 ms
Discrete output current500 mA
Response time on output560 µs off to on; 870 µs on to off
Maximum leakage current0.4 mA 30 V DC at state 0
Output protection typePower protection integrated fuse on PDM time lag 10 A; Reverse polarity protection; Short-circuit protection; Thermal overload protection
Power supply typePower distribution module
Typical current consumption70 mA at 5 V DC
Electrical connectionScrew terminal
Isolation between channels and bus1500 V for 1 minute
Fallback statusState 0 basic NIMs; User configurable standard NIMs
Surge current5 A 0.5 ms
Minimum load0.5 mA
ResetManual reset COM fault
Overvoltage categoryII
Local signalling1 LED (green) for module status (RDY); 1 LED per channel (green) for channel status (OUT1 to OUT4); 1 LED (red) for module error (ERR)
Height13.9 mm
Width128.3 mm
Depth70 mm
Net weight0.11 kg
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP20
MarkingCE
Product certificationsFM Class 1 Division 2; UL; CSA
StandardsEN/IEC 61131-2
Ambient air temperature for operation0…60 °C (without derating)
Ambient air temperature for storage-40…85 °C without derating
Relative humidity95 % at 60 °C without condensation
Pollution degree2
Vibration resistance3 gn (f = 58…150 Hz) on 35 x 7.5 mm symmetrical DIN rail; 5 gn (f = 58…150 Hz) on 35 x 15 mm symmetrical DIN rail; +/-0.35 mm (f = 10…58 Hz)
Shock resistance30 gn for 11 ms conforming to IEC 88 reference 2-27
Logistical informations
Country of originID
Main
Range of productModicon STB distributed I/O solution
Product or component typeStandard digital output kit
Kit compositionSTBXTS1100, 6-terminal screw type connector; STBXTS2100, 6-terminal spring clamp connector; STBXBA1000 base; STBDDO3410 module
Product compatibilityPower distribution module STBPDT3100/3105; I/O base STBXBA1000
Range compatibilityLogic/motion controller - Modicon M262; Modicon M580; Third party
Device applicationIndustrial application
Discrete output number4
Discrete output logicPositive logic (source)/negative logic (sink)
Discrete output voltage24 V DC for solid state
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height2.700 cm
Package 1 Width8.000 cm
Package 1 Length13.000 cm
Package 1 Weight135.000 g
Unit Type of Package 2S02
Number of Units in Package 228
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight4.270 kg
Modicon STB. Digital output modules. Standard digital output kit, Modicon STB, 24 V DC, 0.5 A. Channels 4, Type S. Scope of delivery of the kit order designations. xxxxK contains the electronic module, the module carrier and the corresponding connection technology, one each in screw and spring-loaded terminal versions.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/610050
qrcode für Schneider Electric STBDDO3410K output module digital 4DO 24 VDC