Further information for Schneider Electric STBAVI1270K analog input module 2E +/-10 V
Complementary
Absolute maximum input
50 V
Fallback status
State 0 basic NIMs; User configurable standard NIMs
Data format
IEC 61131-2; EN 61131-2
Update time
10 ms
Integral linearity
+/- 0.2 %FS
Differential linearity
Monotonic
Maximum supply current for sensors
100 mA per input channels
Absolute accuracy error
+/- 0.5 % of full scale 25 °C
Addressing requirement
4 input words
Supply
Power distribution module
Analogue input type
Voltage +/- 10 V
Analogue input resolution
11 bits + sign
Input impedance
400 kOhm
Input protection type
Protected against short-circuit
Temperature drift
+/-0.01 %/°C
Typical current consumption
30 mA at 5 V DC for logic bus
Isolation between channels and bus
1500 V for 1 minute
Hot swapping fallback
Yes for standard NIMs
Local signalling
1 LED green for module status (RDY); 1 LED red for module error (ERR)
Height
18.4 mm
Width
128.3 mm
Depth
70 mm
Net weight
0.115 kg
Overvoltage category
II
Cold swapping
Contractual warranty
Warranty (in months)
18
Environment
IP degree of protection
IP20
Marking
CE
Product certifications
CSA; C-Tick; UL; ATEX Cat 3G; FM Class 1 Division 2
Ambient air temperature for operation
-25…70 °C (without derating)
Ambient air temperature for storage
-40…85 °C without derating
Relative humidity
95 % at 60 °C without condensation
Operating altitude
2000 m
Pollution degree
2
Vibration resistance
+/-0.35 mm (f = 10…58 Hz); 3 gn (f = 58…150 Hz) on 35 mm DIN rail; 5 gn (f = 58…150 Hz) on 35 mm DIN rail
Shock resistance
30 gn for 11 ms conforming to IEC 88 reference 2-27
Logistical informations
Country of origin
ID
Main
Range of product
Modicon STB distributed I/O solution
Product or component type
Standard analog input kit
Kit composition
STBXBA1000 base; STBXTS1100, 6-terminal screw type connector; STBAVI1270 module; STBXTS2100, 6-terminal spring clamp connector
Product compatibility
Mounting base STBXBA1000; Power distribution module STBPDT3100/3105
Analogue input number
2
Type of filter
Single low pass input filter 25 Hz
Analogue output number
0
Packing Units
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
2.500 cm
Package 1 Width
8.000 cm
Package 1 Length
13.000 cm
Package 1 Weight
138.000 g
Unit Type of Package 2
S02
Number of Units in Package 2
28
Package 2 Height
15.000 cm
Package 2 Width
30.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
4.326 kg
Modicon STB. Analog input modules. Standard set analog input, Modicon STB-± 10V, 11 bit+signal. Channels 2. Scope of delivery of the kit order designations. xxxxK contains the electronic module, the module carrier and the corresponding connection technology, one each in screw and spring-loaded terminal versions.