Further information for Schneider Electric STBACI8320K analog input module 4–20 mA 4E
Complementary
Absolute maximum input
25 mA/50 V
Data format
IEC 61131-2; EN 61131-2
Update time
80 ms
Integral linearity
+/- 0.05 %FS
Differential linearity
Monotonic
Maximum supply current for sensors
25 mA per input channels
Absolute accuracy error
+/- 0.4 % of full scale 25 °C
Addressing requirement
8 input words
Supply
Power distribution module
Analogue input type
Current 0...20 mA; Current 4...20 mA
Analogue input resolution
15 bits + sign
Input impedance
250 Ohm
Input protection type
Protected against short-circuit
Temperature drift
+/-0.005 %/°C
Typical current consumption
95 mA at 5 V DC for logic bus
Isolation between channels and bus
1780 Vrms for 1 minute
Hot swapping fallback
Yes for standard NIMs
Local signalling
1 LED green for module status (RDY); 1 LED red for module error (ERR)
Height
18.4 mm
Width
128.3 mm
Depth
70 mm
Overvoltage category
II
Cold swapping
Contractual warranty
Warranty (in months)
18
Environment
IP degree of protection
IP20
Marking
CE
Product certifications
CSA; C-Tick; ATEX Cat 3G; FM Class 1 Division 2; UL
Ambient air temperature for operation
-25…70 °C (without derating)
Ambient air temperature for storage
-40…85 °C without derating
Relative humidity
95 % at 60 °C without condensation
Operating altitude
2000 m
Pollution degree
2
Vibration resistance
+/-0.35 mm (f = 10…58 Hz); 3 gn (f = 58…150 Hz) on 35 mm DIN rail; 5 gn (f = 58…150 Hz) on 35 mm DIN rail
Shock resistance
30 gn for 11 ms conforming to IEC 88 reference 2-27
Logistical informations
Country of origin
ID
Main
Range of product
Modicon STB distributed I/O solution
Product or component type
Standard analog input kit
Kit composition
STBACI8320 module; STBXBA2000 base; STBXTS1100, 6-terminal screw type connector; STBXTS2100, 6-terminal spring clamp connector
Product compatibility
Power distribution module STBPDT3100/3105; Mounting base STBXBA2000
Analogue input number
4
Type of filter
Single low pass input filter 985 Hz
Analogue output number
0
Packing Units
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
3.0 cm
Package 1 Width
8.0 cm
Package 1 Length
13.0 cm
Package 1 Weight
146.0 g
Unit Type of Package 2
S02
Number of Units in Package 2
28
Package 2 Height
15.0 cm
Package 2 Width
30.0 cm
Package 2 Length
40.0 cm
Package 2 Weight
4.599 kg
Unit Type of Package 3
PAL
Number of Units in Package 3
448
Package 3 Height
60.0 cm
Package 3 Width
80.0 cm
Package 3 Length
448.0 cm
Package 3 Weight
65.408 kg
Modicon STB. Analogue input modules. Analogue kit. Standard STB input module, 4-20mA, 15 bit+VZ. Channels 4. Scope of delivery of the kit order designations. xxxxK contains the electronic module, the module carrier and the corresponding connection technology, one each in screw and spring-loaded terminal versions.