| Complementary |
| Product configuration type | Relay configuration |
| Mounting support | Symmetrical DIN rail |
| [In] rated current | 12 A |
| Output voltage | 48...600 V AC |
| [Uc] control circuit voltage | 4...32 V DC |
| Tightening torque | 0.5...0.8 N.m for input; 0.5...0.8 N.m for output |
| Connections - terminals | Screw terminals: 1 x 0.3...1 x 1.5 mm², (22 AWG...16 AWG) for input; Screw terminals: 1 x 0.3...1 x 2.5 mm², (22 AWG...14 AWG) for output |
| maximum capacitance | 10 pF for input/output |
| Insulation resistance | 1000 MOhm at 500 V DC |
| Local signalling | LED (green) for input status |
| pick-up voltage | 4 V DC turn-on |
| drop-out voltage | 1 V DC turn-off |
| input current | 9…11 mA |
| Solid state output type | SCR output; Zero voltage switching |
| Load current | 0.15…12 A |
| transient overvoltage | 1200 V |
| Surge current | 715 A for 16.6 ms; 750 A for 20 ms |
| Motor power hp | 0.33 hp 40 °C 240 V AC |
| Maximum I²t for fusing | 2560 A².s for 10 ms at 50 Hz; 2330 A².s for 8.33 ms at 60 Hz |
| Maximum leakage current | 0.2 mA off-state |
| DV/dt | 500 V/µs off-state at maximum voltage |
| Response time | 0.5 cycle (turn-on); 0.5 cycle (turn-off) |
| power factor | 0.5 (with maximum load) |
| Overvoltage category | III |
| Width | 18.5 mm |
| Height | 87.5 mm |
| test button | Without test button |
| Depth | 83.5 mm |
| Net weight | 0.075 kg |
| Device presentation | Complete product |
| [Ui] rated insulation voltage | 600 V |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Flame retardance | V0 conforming to UL 94 |
| Dielectric strength | 4 kV AC for input/output; 4 kV AC for input or output to case |
| Pollution degree | 2 |
| Standards | IEC 60950-1; IEC 61000; IEC 62314 |
| Product certifications | CSA; UL |
| Marking | CE |
| IP degree of protection | IP20 |
| Ambient air temperature for operation | -30…80 °C |
| Ambient air temperature for storage | -30…100 °C |
| Logistical informations |
| Country of origin | MX |
| Main |
| Range of product | Harmony Solid State Relays |
| Device short name | SSM |
| Product or component type | Modular DIN rail relay |
| Number of channels | 1 |
| Number of phases | 1 phase |
| Output switching mode | Zero voltage switching |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 2.000 cm |
| Package 1 Width | 9.000 cm |
| Package 1 Length | 9.000 cm |
| Package 1 Weight | 86.000 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 72 |
| Package 2 Height | 15 cm |
| Package 2 Width | 30 cm |
| Package 2 Length | 40 cm |
| Package 2 Weight | 6.571 kg |
Harmony Relay. Modular semiconductor relay for mounting on a top hat rail in an innovative, compact design with a cooling surface on the side. The load circuit is designed for 1-phase networks in the range of 48-600 VAC and 12 A can be switched. The switching behavior is zero-voltage switching and corresponds to a normally open contact. The control voltage is 4-32 VDC. An LED display provides information about the control. The connection is made with screw terminals. The dimensions are 18x88x84 mm.