Schneider Electric SSL1D101BD, EAN: 3606480579684

Schneider Electric SSL1D101BD semiconductor relay plug-in

Industrial Material > Industrial relays and contactors > Industrial Relays

Schneider Electric SSL1D101BD semiconductor relay plug-in

Lieske Part No. 1851014
Mfg Part No SSL1D101BD
EAN-Code 3606480579684
Manufacturer Schneider Electric
Here only 188,10 EUR
223,84 EUR incl. VAT

Further information for Schneider Electric SSL1D101BD semiconductor relay plug-in

Complementary
Mounting supportSocket
[In] rated current0.1 A
Output voltage1...48 V DC
Capacitance unbalance2.5 pF input/output
Minimum switching voltage16 V DC turn-on
Maximum switching voltage9 V DC turn-off
Input current5 mA
Input impedance4500 Ohm
Solid state output typeDC switching; Transistor output
Load current0.001…0.1 A
Transient Overvoltage60 V
Maximum operating frequency500 Hz
Surge current0.3 A for 10 ms
Maximum leakage current0.001 mA off-state
Response time0.02 ms (turn-on); 0.13 ms (turn-off)
Overvoltage categoryIII
Width5 mm
Height28 mm
Depth15 mm
Net weight0.0041 kg
Device presentationComplete product
Contractual warranty
Warranty (in months)18
Environment
Flame retardanceV0 conforming to UL 94
Dielectric strength3750 V for input/output
Pollution degree2
StandardsIEC/EN 60947-1; IEC/EN 62314; UL 508; C22.2 No. 14
Product certificationscURus; CSA; EAC; CE; UKCA
MarkingCE
IP degree of protectionIP00
Ambient air temperature for operation-20…80 °C
Ambient air temperature for storage-20…85 °C
Logistical informations
Country of originMX
Main
Range of productHarmony Solid State Relays
Device short nameSSL
Network number of phases1 phase
[Uc] control circuit voltage16...30 V
Output switching modeDC switching
Ui rated insulation voltage48 V
Insulation resistance> 100 MOhm at 500 V DC
[Uimp] rated impulse withstand voltage5.3 kV for input to case conforming to IEC 62314; 5.3 kV for input/output circuit conforming to IEC 62314; 5.3 kV for input/output circuit conforming to UL 508; 5.3 kV output to case; 5.3 kV output to case conforming to IEC 62314; 5.3 kV for input to case conforming to UL 508; 5.3 kV output to case conforming to UL 508
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height1.900 cm
Package 1 Width0.500 cm
Package 1 Length2.800 cm
Package 1 Weight3.000 g
Unit Type of Package 2BB1
Number of Units in Package 210
Package 2 Height5.000 cm
Package 2 Width3.000 cm
Package 2 Length12.500 cm
Package 2 Weight52.000 g
Unit Type of Package 3S01
Number of Units in Package 3280
Package 3 Height15.000 cm
Package 3 Width15.000 cm
Package 3 Length40.000 cm
Package 3 Weight1.707 kg
Harmony Relay. Plug-in semiconductor relay as a component for installation in a separate plug-in socket in a slim design of 6.2 mm. Control is carried out in the voltage range 16-30 VDC. On the output side, voltages of 1-48 VDC up to 0.1 A can be switched single-pole. The switching behavior is DC switching, is carried out by transistors and corresponds to a normally open contact. A suitable socket would be SSLZRA1 or SSLZVA1.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1851014
qrcode für Schneider Electric SSL1D101BD semiconductor relay plug-in