| Complementary |
| Mounting support | Screw socket |
| [In] rated current | 3.5 A |
| Output voltage | 1...24 V DC |
| CLAMPING FORCE | < 0.5 N.m; 4.4 lb-in |
| Capacitance unbalance | 1.5 pF input/output |
| Minimum switching voltage | 4 V DC turn-on |
| Maximum switching voltage | 1 V DC turn-off |
| Input impedance | 500 Ohm |
| Solid state output type | Mosfet output; DC switching |
| Load current | 0.001…3.5 A |
| Transient Overvoltage | 30 V DC |
| Surge current | 9 A for 10 ms |
| Maximum leakage current | 0.001 mA off-state |
| Response time | 0.12 ms (turn-off); 0.1 ms (turn-on) |
| Overvoltage category | III |
| Width | 6.2 mm |
| Height | 96.5 mm |
| Depth | 79.5 mm |
| Net weight | 0.0285 kg |
| Device presentation | Complete product |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Flame retardance | V0 conforming to UL 94 |
| Dielectric strength | 2500 V for input/output |
| Pollution degree | 2 |
| Standards | IEC 60950-1; IEC 61000; IEC 62314; IEC 61984; EN 61984 |
| Product certifications | UL; CSA; CE; UL 508; CSA22.2 No. 14-10; GOST |
| Marking | CURus; CSA; CE; EAC |
| IP degree of protection | IP20 |
| Ambient air temperature for operation | -20…70 °C |
| Ambient air temperature for storage | -20…85 °C |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range of product | Harmony Solid State Relays |
| Device short name | SSL |
| Network number of phases | 1 phase |
| [Uc] control circuit voltage | 4...12 V |
| Connections - terminals | Screw connectors |
| Output switching mode | DC switching |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 8.000 cm |
| Package 1 Width | 0.800 cm |
| Package 1 Length | 9.800 cm |
| Package 1 Weight | 27.000 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 30 |
| Package 2 Height | 9.500 cm |
| Package 2 Width | 10.500 cm |
| Package 2 Length | 20.000 cm |
| Package 2 Weight | 898.000 g |
| Unit Type of Package 3 | S03 |
| Number of Units in Package 3 | 60 |
| Package 3 Height | 30 cm |
| Package 3 Width | 30 cm |
| Package 3 Length | 40 cm |
| Package 3 Weight | 2.580 kg |
Solid state relay Harmony Relay SSL. Fully assembled solid state relay in a plug-in base for direct use, width 6.2 mm for mounting on a top hat rail. Input for control voltage 3-12 VDC. Switching output 1-24 VDC, 3.5 A, DC switching. Single-pole MOSFET output and corresponds to a normally open contact. Plug-in base with LED display, reverse polarity protection and lever for locking or easy removal. Connection technology screw terminals. Connection of comb rails for potential bridging available.