| Complementary |
| Mounting support | Socket |
| [In] rated current | 3.5 A |
| Output voltage | 3...30 V DC |
| Capacitance unbalance | 2.5 pF input/output |
| Minimum switching voltage | 15 V DC turn-on |
| Maximum switching voltage | 10 V DC turn-off |
| Input current | 7 mA |
| Input impedance | 3500 Ohm |
| Solid state output type | Mosfet output; DC switching |
| Load current | 0.001…3.5 A |
| Transient Overvoltage | 35 V |
| Maximum operating frequency | 500 Hz |
| Surge current | 9 A for 10 ms |
| Maximum leakage current | 0.001 mA off-state |
| Response time | 0.2 ms (turn-on); 0.1 ms (turn-off) |
| Overvoltage category | III |
| Width | 5 mm |
| Height | 28 mm |
| Depth | 15 mm |
| Net weight | 0.0041 kg |
| Device presentation | Complete product |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Flame retardance | V0 conforming to UL 94 |
| Dielectric strength | 2500 V for input/output |
| Pollution degree | 2 |
| Standards | IEC/EN 60947-1; IEC/EN 62314; UL 508; C22.2 No. 14 |
| Product certifications | cURus; CSA; EAC; CE; UKCA |
| Marking | CE |
| IP degree of protection | IP00 |
| Ambient air temperature for operation | -20…80 °C |
| Ambient air temperature for storage | -20…85 °C |
| Logistical informations |
| Country of origin | MX |
| Main |
| Range of product | Harmony Solid State Relays |
| Device short name | SSL |
| Network number of phases | 1 phase |
| [Uc] control circuit voltage | 15...30 V |
| Output switching mode | DC switching |
| Ui rated insulation voltage | 30 V |
| Insulation resistance | > 100 MOhm at 500 V DC |
| [Uimp] rated impulse withstand voltage | 3.5 kV for input to case conforming to IEC 62314; 3.5 kV for input/output circuit conforming to UL 508; 3.5 kV for input/output circuit conforming to IEC 62314; 3.5 kV output to case conforming to IEC 62314; 3.5 kV output to case; 3.5 kV for input to case conforming to UL 508; 3.5 kV output to case conforming to UL 508 |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 0.500 cm |
| Package 1 Width | 1.800 cm |
| Package 1 Length | 2.800 cm |
| Package 1 Weight | 4.000 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 10 |
| Package 2 Height | 3.000 cm |
| Package 2 Width | 5.000 cm |
| Package 2 Length | 12.500 cm |
| Package 2 Weight | 55.000 g |
| Unit Type of Package 3 | S01 |
| Number of Units in Package 3 | 280 |
| Package 3 Height | 15.000 cm |
| Package 3 Width | 15.000 cm |
| Package 3 Length | 40.000 cm |
| Package 3 Weight | 1.778 kg |
Harmony Relay. Steckbares Halbleiterrelais als Komponente für die Montage in einem separaten Stecksockel in schmaler Bauform von 6,2 mm. Ansteuerung erfolgt im Spannungsbereich 15-30 VDC. Ausgangsseitig können Spannung 1-24 VDC bis zu 3,5 A einpolig geschaltet werden. Durch den geringen internen Spannungsabfall kann ein entsprechend hoher Schaltstrom realisiert werden. Das Schaltverhalten ist gleichspannungsschaltend, wird durch MOSFETs durchgeführt und entspricht einem Schliesserkontakt. Ein passender Sockel wäre SSLZRA1 oder SSLZVA1.