Schneider Electric SSL1A12BDR, EAN: 3606480579738

Schneider Electric SSL1A12BDR semiconductor relay pluggable

Industrial Material > Industrial relays and contactors > Industrial Relays

Schneider Electric SSL1A12BDR semiconductor relay pluggable

Lieske Part No. 1851015
Mfg Part No SSL1A12BDR
EAN-Code 3606480579738
Manufacturer Schneider Electric
Here only 238,83 EUR
284,21 EUR incl. VAT

Further information for Schneider Electric SSL1A12BDR semiconductor relay pluggable

Complementary
Mounting supportSocket
[In] rated current2 A
Output voltage24...280 V AC
Capacitance unbalance2.5 pF input/output
Minimum switching voltage15 V DC turn-on
Maximum switching voltage10 V DC turn-off
Input current6 mA
Input impedance2500 Ohm
Solid state output typeSCR output; Random voltage switching
Load current0.07…2 A
Transient Overvoltage600 V
Surge current84 A for 16.6 ms; 80 A for 20 ms
Maximum I²t for fusing33 A².s for 10 ms at 50 Hz; 29 A².s for 8.3 ms at 60 Hz
Maximum leakage current4 mA off-state
DV/dt500 V/µs off-state at maximum voltage
Response time0.5 cycle (turn-off); 0.1 ms (turn-on)
Overvoltage categoryIII
Width5 mm
Height28 mm
Depth15 mm
Net weight0.0041 kg
Device presentationComplete product
Contractual warranty
Warranty (in months)18
Environment
Flame retardanceV0 conforming to UL 94
Dielectric strength2500 V for input/output
Pollution degree2
StandardsIEC/EN 60947-4-3; IEC/EN 62314; UL 508; C22.2 No. 14
Product certificationscURus; CSA; EAC; CE; UKCA
MarkingCE
IP degree of protectionIP00
Ambient air temperature for operation-20…80 °C
Ambient air temperature for storage-20…85 °C
Logistical informations
Country of originMX
Main
Range of productHarmony Solid State Relays
Device short nameSSL
Network number of phases1 phase
[Uc] control circuit voltage15...30 V
Output switching modeRandom voltage switching
Short-circuit current5000 A
Associated fuse rating2.5 A at 250 V coordination type 1
Ui rated insulation voltage280 V
Insulation resistance> 100 MOhm at 500 V DC
[Uimp] rated impulse withstand voltage4.0 kV for input to case conforming to IEC 62314; 4.0 kV for input/output circuit conforming to UL 508; 4.0 kV for input/output circuit conforming to IEC 62314; 4.0 kV output to case; 4.0 kV output to case conforming to IEC 62314; 4.0 kV for input to case conforming to UL 508; 4.0 kV output to case conforming to UL 508
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height0.700 cm
Package 1 Width2.500 cm
Package 1 Length37.000 cm
Package 1 Weight4.000 g
Unit Type of Package 2BB1
Number of Units in Package 212
Package 2 Height0.700 cm
Package 2 Width2.500 cm
Package 2 Length37.000 cm
Package 2 Weight61.000 g
Unit Type of Package 3S01
Number of Units in Package 31080
Package 3 Height15.000 cm
Package 3 Width15.000 cm
Package 3 Length40.000 cm
Package 3 Weight5.872 kg
Harmony Relay. Plug-in semiconductor relay as a component for installation in a separate plug-in socket in a slim design of 6.2 mm. Control is carried out in the voltage range 15-30 VDC. On the output side, voltages of 24-280 VAC up to 2 A can be switched single-phase. The switching behavior is instantaneous, takes place using SCRs (thyristors) and corresponds to a normally open contact. A suitable socket would be SSLZRA1 or SSLZVA1.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1851015
qrcode für Schneider Electric SSL1A12BDR semiconductor relay pluggable