220 V AC 1 phase; 230 V AC 1 phase; 240 V AC 1 phase; 380 V AC 3 phases; 400 V AC 3 phases; 415 V AC 3 phases
Other input voltage
220 V; 240 V; 380 V; 415 V
Efficiency at full load
100...275 V adjustable (half load); 173...476 V adjustable (half load)
Input connection
1 hard wire 3-wire (1P + N + E); 1 hard wire 5-wire (3P + N + E)
Input frequency
40...70 Hz auto-sensing
Output voltage
220 V 1 phase; 230 V 1 phase; 240 V 1 phase
Other output voltage
220 V; 240 V
Rated power in W
8000 W
Rated power in VA
8000 VA
Output connection
6 IEC 60320; 3 IEC Jumpers; 4 IEC 60320
Bypass type
Internal bypass (automatic and manual)
Crest factor
3 : 1
Harmonic distortion
Less than 2 %
Maximum configurable power in VA
8000 VA
Maximum configurable power in W
8000 W
UPS topology
On-Line
Waveform type
Sine wave
Output frequency
50/60 Hz +/- 3 Hz sync to mains
Replacement battery
APCRBC140
Overview
Presentation
High density, double-conversion on-line power protection with scalable runtime.
Packing Units
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
46.1 cm
Package 1 Width
60 cm
Package 1 Length
100 cm
Package 1 Weight
126.82 kg
This APC Smart-UPS is designed for IT professionals and network administrators to maintain business uptime and continuity. This 8kVA online tower UPS offers pure sine wave power and extended runtime to support critical electronics during power outages. It comes with a hardwired 3-wire(1P+N+E)/5-wire(3P+N+E) input, 6x IEC 320 C13, 4x IEC 320 C19 outputs and 3x IEC jumper cables. The UPS has an integrated network management card for network-based monitoring and management of the UPS. The UPS is equipped with PowerChute Network Shutdown which enables safe shutdown of physical servers, virtual machines and HCI clusters. It has an additional SmartSlot for optional accessory card such as Dry Contact I/O card. The UPS can be connected to EcoStruxure IT or third-party centralized management platforms. The UPS has a 3-year warranty and the built-in lead-acid battery has a 2-year warranty. The UPS is compatible with the SRTRK2 (4-post) and SRTRK3 (2-post) rack mount kits, sold separately. Not intended for consumer use.