| Complementary |
| Analogue input number | 2 |
| Analogue input type | Common mode |
| Analogue input range | 0...10 V; 0...20 mA; -25...125 °C |
| Temperature probe type | Pt 100, 3-wire conforming to IEC 751 |
| Maximum permissible voltage | 30 V for analogue input circuit |
| [Imp] maximum permanent current | 30 mA for analogue input circuit |
| Analogue input resolution | 10 bits on the input range |
| Input impedance | 18 kOhm, input range: 0...10 V for analogue input circuit; 247 Ohm, input range: 0...20 mA for analogue input circuit |
| Analogue output number | 2 |
| Analogue output range | 0...10 V |
| Analogue output resolution | 10 bits on the output range |
| Load type | Resistive load for analogue output |
| Maximum load current | 10 mA for analogue output |
| Short-circuit protection | With analogue output |
| LSB value | 0.15 °C, - 25...125 °C for analogue input circuit; 20 µA, 0...20 mA for analogue input circuit; 9.8 mV, 0...10 V for analogue input circuit; 9.8 mV, 0...10 V for analogue output |
| Conversion time | Smart relay cycle time for analogue input circuit; Smart relay cycle time for analogue output |
| Repeat accuracy | < +/- 0.3 °C, input range: - 25...125 °C at 25 °C for analogue input circuit; |
| Operating distance | 10 m with screened cable for analogue input circuit; 10 m with screened cable for analogue output |
| Reverse polarity protection | Analogue input circuit: with |
| Connections - terminals | Screw terminals, 1 x 0.25...1 x 2.5 mm² (24 AWG...14 AWG) semi-solid; Screw terminals, 1 x 0.25...1 x 2.5 mm² (24 AWG...14 AWG) solid; Screw terminals, 2 x 0.25...2 x 1.5 mm² (23 AWG...16 AWG) solid; Screw terminals, 1 x 0.25...1 x 2.5 mm² (24 AWG...14 AWG) flexible with cable end; Screw terminals, 2 x 0.25...2 x 0.75 mm² (24 AWG...18 AWG) flexible with cable end |
| Tightening torque | 0.5 N.m |
| Net weight | 0.11 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Product certifications | GOST; UL; C-Tick; CSA |
| Standards | IEC 61000-4-12; IEC 61000-4-5; IEC 61000-4-3; IEC 61000-4-4 level 3; IEC 61000-4-6 level 3; IEC 61000-4-2 level 3; IEC 60068-2-6 Fc; IEC 61000-4-11; IEC 60068-2-27 Ea |
| IP degree of protection | IP20 (terminal block) conforming to IEC 60529; IP40 (front panel) conforming to IEC 60529 |
| Environmental characteristic | EMC directive conforming to IEC 61000-6-2; EMC directive conforming to IEC 61000-6-3; EMC directive conforming to IEC 61000-6-4; EMC directive conforming to IEC 61131-2 zone B; Low voltage directive conforming to IEC 61131-2 |
| Disturbance radiated/conducted | Class B conforming to IEC 55022-11 Group 1 |
| Pollution degree | 2 conforming to IEC 61131-2 |
| Ambient air temperature for operation | -20…40 °C conforming to IEC 60068-2-1 and IEC 60068-2-2; -20…55 °C conforming to IEC 60068-2-1 and IEC 60068-2-2 |
| Ambient air temperature for storage | -40…70 °C |
| Operating altitude | 2000 m |
| Maximum altitude transport | 3048 m |
| Relative humidity | 95 % without condensation or dripping water |
| Logistical informations |
| Country of origin | FR |
| Main |
| Range of product | Zelio Logic |
| Product or component type | Analogue I/O extension module |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 6.000 cm |
| Package 1 Width | 6.500 cm |
| Package 1 Length | 11.000 cm |
| Package 1 Weight | 105.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 48 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 5.516 kg |
I/O extension module for modular PLC control relay Zelio Logic SR3. A total of 4 I/Os, of which 2 are analog inputs (0 V to 10 V or 4 mA to 20 mA), 2 analog outputs (0 V to 10 V). The power supply is via the PLC control relay. Terminal block protection class IP20, front panel protection class IP54. Mounting on 35 mm DIN rail. Certified according to CE, cULus Listed, CSA, GL, GOST, C-Tick.