| Complementary |
| Maximum mechanical speed | 3800 rpm |
| [Us] rated supply voltage | 115...480 V |
| Network number of phases | Three phase |
| Continuous stall current | 33.2 A |
| Continuous stall torque | 94.4 N.m at 115...480 V three phase |
| Continuous power | 10600 W |
| Peak stall torque | 330 N.m at 115...480 V three phase |
| Nominal output power | 4450 W at 115 V single phase; 7790 W at 230 V single phase; 10620 W at 400 V three phase; 10100 W at 480 V three phase |
| Nominal torque | 84.9 N.m at 115 V single phase; 74.4 N.m at 230 V single phase; 50.7 N.m at 400 V three phase; 40.2 N.m at 480 V three phase |
| Nominal speed | 500 rpm at 115 V single phase; 1000 rpm at 230 V single phase; 2000 rpm at 400 V three phase; 2400 rpm at 480 V three phase |
| Maximum current Irms | 136.1 A |
| Shaft end | Parallel key |
| Shaft diameter | 38 mm |
| Shaft length | 80 mm |
| Key width | 10 mm |
| IP degree of protection | IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5; IP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5 |
| Encoder type | Absolute multiturn SinCos Hiperface |
| Speed feedback resolution | 128 periods |
| Holding brake | Without |
| Mounting support | International standard flange |
| Motor flange size | 205 mm |
| Electrical connection | Straight connector |
| Torque constant | 2.84 N.m/A at 120 °C |
| Back emf constant | 172 V/krpm at 20 °C |
| Number of motor poles | 5 |
| Rotor inertia | 190 kg.cm² |
| Stator resistance | 0.2 Ohm |
| Stator inductance | 2.05 mH |
| Maximum radial force Fr | 4500 N at 1000 rpm; 3570 N at 2000 rpm; 3120 N at 3000 rpm |
| Maximum axial force Fa | 740 N |
| Type of cooling | Natural convection |
| Length | 489 mm |
| Centring collar diameter | 180 mm |
| Centring collar depth | 4 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 14 mm |
| Circle diameter of the mounting holes | 215 mm |
| Net weight | 67 kg |
| Sizing reference | SH32053P |
| Temperature copper hot | 130 °C |
| Output current 3s peak | 136.1 A |
| Inertia | 0.0 kg.cm² of brake; 190.0 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Range compatibility | PacDrive 3 |
| Device short name | SH3 |
| Product or component type | Servo motor |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 40 cm |
| Package 1 Width | 30 cm |
| Package 1 Length | 79.5 cm |
| Package 1 Weight | 67.5 kg |
Lexium SH3 Servomotor für die motion-basierte Automatisierung mit PacDrive 3. Diese Reihe an AC-Servomotoren weist ein geringes Rotorträgheitmoment auf, das eine hohe Beschleunigungsfähigkeit für dynamische Anwendung ermöglicht. Dank der Wicklungstechnologie ergibt sich eine höhere Leistungsdichte in kompakter Ausführung. Dieser Servo hat ein Flanschmass von 205 mm und eine Motorlänge von 3 Stacks. Seine Wicklung ist auf das Drehmoment und Drehzahl optimiert. Er verfügt über ein Dauerstillstandsmoment von 94,4 Nm und ein Spitzenmoment von 330 Nm. Die spannungsabhängige Nenndrehzahl erreicht 2000 U/min bei einer Nennleistung bis 5,5 kW. Das Wellenende ist mit einer Passfeder versehen. Der optische Absolutwert-Encoder ist als Sin/Cos Multiturn mit hoher Auflösung von 128 Perioden pro Umdrehung ausgeführt, was 131.072 Punkte pro Drehung entspricht. Es ist keine Haltebremse integriert. Der Anschluss des Motorkabels erfolgt über einen gewinkelten M40-Stecker und des Encoderkabels über einen gewinkelten M23-Stecker an entsprechende Lexium 62-Servoantriebe. Die Schutzart der Welle ist in IP54 und des Gehäuses in IP65 ausgeführt.