Schneider Electric SH32053P02F2100, EAN: 3606485470078

Schneider Electric SH32053P02F2100 servo motor 94.4 Nm without keyway

Industrial Material > Engines and accessories

Schneider Electric SH32053P02F2100 servo motor 94.4 Nm without keyway

Lieske Part No. 1869284
Mfg Part No SH32053P02F2100
EAN-Code 3606485470078
Manufacturer Schneider Electric
Here only 7.771,70 EUR
9.248,32 EUR incl. VAT

Further information for Schneider Electric SH32053P02F2100 servo motor 94.4 Nm without keyway

Complementary
Maximum mechanical speed3800 rpm
[Us] rated supply voltage115...480 V
Network number of phasesThree phase
Continuous stall current33.2 A
Continuous stall torque94.4 N.m at 115...480 V three phase
Continuous power10600 W
Peak stall torque330 N.m at 115...480 V three phase
Nominal output power4450 W at 115 V single phase; 7790 W at 230 V single phase; 10620 W at 400 V three phase; 10100 W at 480 V three phase
Nominal torque84.9 N.m at 115 V single phase; 74.4 N.m at 230 V single phase; 50.7 N.m at 400 V three phase; 40.2 N.m at 480 V three phase
Nominal speed500 rpm at 115 V single phase; 1000 rpm at 230 V single phase; 2000 rpm at 400 V three phase; 2400 rpm at 480 V three phase
Maximum current Irms136.1 A
Shaft endSmooth shaft
Shaft diameter38 mm
Shaft length80 mm
IP degree of protectionIP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5
Encoder typeAbsolute multiturn SinCos Hiperface
Speed feedback resolution128 periods
Holding brakeWith
Holding torque80 N.m
Mounting supportInternational standard flange
Motor flange size205 mm
Electrical connectionStraight connector
Torque constant2.84 N.m/A at 120 °C
Back emf constant172 V/krpm at 20 °C
Number of motor poles5.0
Rotor inertia206 kg.cm²
Stator resistance0.2 Ohm
Stator inductance2.05 mH
Maximum radial force Fr4500 N at 1000 rpm; 3570 N at 2000 rpm; 3120 N at 3000 rpm
Maximum axial force Fa740 N
Type of coolingNatural convection
Length538.5 mm
Centring collar diameter180 mm
Centring collar depth4 mm
Number of mounting holes4
Mounting holes diameter14 mm
Circle diameter of the mounting holes215 mm
Net weight70.6 kg
Sizing referenceSH32053P
Temperature copper hot130 °C
Output current 3s peak136.1 A
Inertia16.0 kg.cm² of brake; 190.0 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Main
Range compatibilityPacDrive 3
Device short nameSH3
Product or component typeServo motor
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height40.0 cm
Package 1 Width30.0 cm
Package 1 Length79.5 cm
Package 1 Weight66.86 kg
Lexium SH3 servo motor. This SH3 series of AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 94.4 Nm and achieves a peak torque of 330 Nm. Its nominal speed is up to 2400 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 10.1 kW. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) as a SinCos Hiperface. The electrical connection is made via M40 + M23 connectors, angled by 90° and rotatable. The motor flange is 205 mm for fastening. The drive shaft has a diameter of 38 mm. The shaft end is smooth and complies with protection class IP65. The motor housing complies with protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium series Lexium 52 & Lexium 62 are recommended for operating the synchronous motor.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1869284
qrcode für Schneider Electric SH32053P02F2100 servo motor 94.4 Nm without keyway