| Complementary |
| Maximum mechanical speed | 3800 rpm |
| [Us] rated supply voltage | 115...480 V |
| Network number of phases | Three phase |
| Continuous stall current | 33.2 A |
| Continuous stall torque | 94.4 N.m at 115...480 V three phase |
| Continuous power | 10600 W |
| Peak stall torque | 330 N.m at 115...480 V three phase |
| Nominal output power | 4450 W at 115 V single phase; 7790 W at 230 V single phase; 10620 W at 400 V three phase; 10100 W at 480 V three phase |
| Nominal torque | 84.9 N.m at 115 V single phase; 74.4 N.m at 230 V single phase; 50.7 N.m at 400 V three phase; 40.2 N.m at 480 V three phase |
| Nominal speed | 500 rpm at 115 V single phase; 1000 rpm at 230 V single phase; 2000 rpm at 400 V three phase; 2400 rpm at 480 V three phase |
| Maximum current Irms | 136.1 A |
| Shaft end | Smooth shaft |
| Shaft diameter | 38 mm |
| Shaft length | 80 mm |
| IP degree of protection | IP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5 |
| Encoder type | Absolute single turn SinCos Hiperface |
| Speed feedback resolution | 128 periods |
| Holding brake | With |
| Holding torque | 80 N.m |
| Mounting support | International standard flange |
| Motor flange size | 205 mm |
| Electrical connection | Straight connector |
| Torque constant | 2.84 N.m/A at 120 °C |
| Back emf constant | 172 V/krpm at 20 °C |
| Number of motor poles | 5.0 |
| Rotor inertia | 206 kg.cm² |
| Stator resistance | 0.2 Ohm |
| Stator inductance | 2.05 mH |
| Maximum radial force Fr | 4500 N at 1000 rpm; 3570 N at 2000 rpm; 3120 N at 3000 rpm |
| Maximum axial force Fa | 740 N |
| Type of cooling | Natural convection |
| Length | 538.5 mm |
| Centring collar diameter | 180 mm |
| Centring collar depth | 4 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 14 mm |
| Circle diameter of the mounting holes | 215 mm |
| Net weight | 70.6 kg |
| Sizing reference | SH32053P |
| Temperature copper hot | 130 °C |
| Number of motor stacks | 3 |
| Output current 3s peak | 136.1 A |
| Inertia | 16.0 kg.cm² of brake; 190.0 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Range compatibility | PacDrive 3 |
| Device short name | SH3 |
| Product or component type | Servo motor |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 41.0 cm |
| Package 1 Width | 31.0 cm |
| Package 1 Length | 72.0 cm |
| Package 1 Weight | 76.6 kg |
Lexium SH3 servo motor. This SH3 series of AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 94.4 Nm and achieves a peak torque of 330 Nm. Its nominal speed is up to 2400 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 10.1 kW. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 205 mm for fastening. The drive shaft has a diameter of 38 mm. The shaft end is smooth and corresponds to protection class IP65. The motor housing has protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium series Lexium 52 & Lexium 62 are recommended for operating the synchronous motor.