| Complementary |
| Maximum mechanical speed | 3800 rpm |
| [Us] rated supply voltage | 115...480 V |
| Network number of phases | Three phase |
| Continuous stall current | 21 A |
| Continuous stall torque | 36.9 N.m at 115...480 V three phase |
| Continuous power | 5500 W |
| Peak stall torque | 110 N.m at 115...480 V three phase |
| Nominal output power | 2510 W at 115 V single phase; 4240 W at 230 V single phase; 5500 W at 400 V three phase; 5200 W at 480 V three phase |
| Nominal torque | 31.9 N.m at 115 V single phase; 27 N.m at 230 V single phase; 17.5 N.m at 400 V three phase; 13.8 N.m at 480 V three phase |
| Nominal speed | 750 rpm at 115 V single phase; 1500 rpm at 230 V single phase; 3000 rpm at 400 V three phase; 3600 rpm at 480 V three phase |
| Maximum current Irms | 87.2 A |
| Shaft end | Smooth shaft |
| Shaft diameter | 38 mm |
| Shaft length | 80 mm |
| IP degree of protection | IP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5 |
| Encoder type | Absolute multiturn SinCos Hiperface |
| Speed feedback resolution | 128 periods |
| Holding brake | Without |
| Mounting support | International standard flange |
| Motor flange size | 205 mm |
| Electrical connection | Rotatable right angled connector |
| Torque constant | 1.75 N.m/A at 120 °C |
| Back emf constant | 104 V/krpm at 20 °C |
| Number of motor poles | 5.0 |
| Rotor inertia | 71.4 kg.cm² |
| Stator resistance | 0.3 Ohm |
| Stator inductance | 2.97 mH |
| Maximum radial force Fr | 3730 N at 1000 rpm; 2960 N at 2000 rpm; 2580 N at 3000 rpm |
| Maximum axial force Fa | 740 N |
| Type of cooling | Natural convection |
| Length | 321 mm |
| Centring collar diameter | 180 mm |
| Centring collar depth | 4 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 14 mm |
| Circle diameter of the mounting holes | 215 mm |
| Net weight | 35 kg |
| Sizing reference | SH32051P |
| Temperature copper hot | 130 °C |
| Output current 3s peak | 87.2 A |
| Inertia | 0.0 kg.cm² of brake; 71.4 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Range compatibility | PacDrive 3 |
| Device short name | SH3 |
| Product or component type | Servo motor |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 29.997 cm |
| Package 1 Width | 40.005 cm |
| Package 1 Length | 79.502 cm |
| Package 1 Weight | 35.0 kg |
Lexium SH3 Servomotor. Diese SH3-Reihe an AC-Servomotoren weist ein geringes Rotorträgheitmoment auf, das eine hohe Beschleunigungsfähigkeit für dynamische Anwendung ermöglicht. Dank der Wicklungstechnologie ergibt sich eine höhere Leistungsdichte in kompakter Ausführung. Dieser Servo hat ein nominelles Dauerstillstandsmoment von 36,9 Nm und erreicht ein Spitzendrehmoment von 110 Nm. Seine Nenndrehzahl beträgt in Abhängigkeit der Versorgungsspannung bis zu 3600 U/min. Es ergibt sich eine spannungsabhängige Nennleistung bis zu 5,2 kW. Der eingebaute Encoder ist als Multiturn mit 128 Perioden/Umdrehung (128x1024x4096) als SinCos Hiperface ausgeführt. Der elektrische Anschluss erfolgt über Steckverbinder M40 + M23, um 90° gewinkelt und drehbar. Zur Befestigung beträgt der Motorflansch 205 mm. Die Antriebswelle hat einen Durchmesser von 38 mm. Das Wellenende ist glatt und entspricht der Schutzart IP65 ausgeführt. Das Motorgehäuse entspricht der Schutzart IP65. Es ist keine Haltebremse vorhanden. Für den Betrieb des Synchronmotors empfehlen sich die Servoverstärker der Lexium-Reihe Lexium 52 & Lexium 62.