Schneider Electric SH31403P11F2100, EAN: 3606485298023

Schneider Electric SH31403P11F2100 servo motor 27

Schneider Electric SH31403P11F2100 servo motor 27

Lieske Part No. 1855238
Mfg Part No SH31403P11F2100
EAN-Code 3606485298023
Manufacturer Schneider Electric
Here only 3.775,45 EUR
4.492,79 EUR incl. VAT

Further information for Schneider Electric SH31403P11F2100 servo motor 27

Complementary
Maximum mechanical speed4000 rpm
[Us] rated supply voltage115...480 V
Network number of phasesThree phase
Continuous stall current17.6 A
Continuous stall torque27.8 N.m at 115...480 V three phase
Continuous power4100 W
Peak stall torque90.2 N.m at 115...480 V three phase
Nominal output power1940 W at 115 V single phase; 3330 W at 230 V single phase; 4050 W at 400 V three phase; 3430 W at 480 V three phase
Nominal torque24.7 N.m at 115 V single phase; 21.2 N.m at 230 V single phase; 12.9 N.m at 400 V three phase; 9.1 N.m at 480 V three phase
Nominal speed750 rpm at 115 V single phase; 1500 rpm at 230 V single phase; 3000 rpm at 400 V three phase; 3600 rpm at 480 V three phase
Maximum current Irms61.0 A
Shaft endParallel key
Shaft diameter24 mm
Shaft length50 mm
Key width8 mm
IP degree of protectionIP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5
Encoder typeAbsolute single turn SinCos Hiperface
Speed feedback resolution128 periods
Holding brakeWith
Holding torque36 N.m
Mounting supportInternational standard flange
Motor flange size140 mm
Electrical connectionRotatable right angled connector
Torque constant1.58 N.m/A at 120 °C
Back emf constant105 V/krpm at 20 °C
Number of motor poles5.0
Rotor inertia23.44 kg.cm²
Stator resistance0.4 Ohm
Stator inductance2.66 mH
Maximum radial force Fr2420 N at 1000 rpm; 1920 N at 2000 rpm; 1670 N at 3000 rpm
Maximum axial force Fa300 N
Type of coolingNatural convection
Length365.5 mm
Centring collar diameter130 mm
Centring collar depth3.5 mm
Number of mounting holes4
Mounting holes diameter11 mm
Circle diameter of the mounting holes165 mm
Net weight23.1 kg
Sizing referenceSH31403P
Temperature copper hot130 °C
Number of motor stacks3
Output current 3s peak61.0 A
Inertia5.5 kg.cm² of brake; 17.94 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Main
Range compatibilityPacDrive 3
Device short nameSH3
Product or component typeServo motor
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height26.0 cm
Package 1 Width20.0 cm
Package 1 Length59.0 cm
Package 1 Weight22.5 kg
Lexium SH3 servo motor. This SH3 series of AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 27.8 Nm and achieves a peak torque of 90.2 Nm. Its nominal speed is up to 3600 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 3430 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 140 mm for fastening. The drive shaft has a diameter of 24 mm. The shaft end is designed with a feather key and corresponds to protection class IP65. The motor housing has protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium series Lexium 52 & Lexium 62 are recommended for operating the synchronous motor.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1855238
qrcode für Schneider Electric SH31403P11F2100 servo motor 27