| Complementary |
| Maximum mechanical speed | 4000 rpm |
| [Us] rated supply voltage | 115...480 V |
| Network number of phases | Three phase |
| Continuous stall current | 17.6 A |
| Continuous stall torque | 27.8 N.m at 115...480 V three phase |
| Continuous power | 4100 W |
| Peak stall torque | 90.2 N.m at 115...480 V three phase |
| Nominal output power | 1940 W at 115 V single phase; 3330 W at 230 V single phase; 4050 W at 400 V three phase; 3430 W at 480 V three phase |
| Nominal torque | 24.7 N.m at 115 V single phase; 21.2 N.m at 230 V single phase; 12.9 N.m at 400 V three phase; 9.1 N.m at 480 V three phase |
| Nominal speed | 750 rpm at 115 V single phase; 1500 rpm at 230 V single phase; 3000 rpm at 400 V three phase; 3600 rpm at 480 V three phase |
| Maximum current Irms | 61.0 A |
| Shaft end | Parallel key |
| Shaft diameter | 24 mm |
| Shaft length | 50 mm |
| Key width | 8 mm |
| IP degree of protection | IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5; IP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5 |
| Encoder type | Absolute single turn SinCos Hiperface |
| Speed feedback resolution | 128 periods |
| Holding brake | Without |
| Mounting support | International standard flange |
| Motor flange size | 140 mm |
| Electrical connection | Rotatable right angled connector |
| Torque constant | 1.58 N.m/A at 120 °C |
| Back emf constant | 105 V/krpm at 20 °C |
| Number of motor poles | 5.0 |
| Rotor inertia | 17.94 kg.cm² |
| Stator resistance | 0.4 Ohm |
| Stator inductance | 2.66 mH |
| Maximum radial force Fr | 2420 N at 1000 rpm; 1920 N at 2000 rpm; 1670 N at 3000 rpm |
| Maximum axial force Fa | 300 N |
| Type of cooling | Natural convection |
| Length | 327.5 mm |
| Centring collar diameter | 130 mm |
| Centring collar depth | 3.5 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 11 mm |
| Circle diameter of the mounting holes | 165 mm |
| Net weight | 21.3 kg |
| Sizing reference | SH31403P |
| Temperature copper hot | 130 °C |
| Output current 3s peak | 61.0 A |
| Inertia | 0.0 kg.cm² of brake; 17.94 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Logistical informations |
| Country of origin | DE |
| Main |
| Range compatibility | PacDrive 3 |
| Device short name | SH3 |
| Product or component type | Servo motor |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 20.0 cm |
| Package 1 Width | 26.0 cm |
| Package 1 Length | 59.0 cm |
| Package 1 Weight | 22.5 kg |
The Schneider Electric servomotor SH31403P11A2000 is an AC servomotor of the Lexium SH3 series, specifically designed for motion-based automation systems in industrial applications. It is part of the PacDrive 3 product family and is suitable for applications requiring high dynamics, precise positioning, and a compact design. The motor features a low rotor inertia, enabling rapid acceleration and high responsiveness, particularly in dynamic processes. The winding technology ensures high power density, allowing the motor to achieve high torques and power outputs despite its compact size.
Applications
The servomotor is designed for industrial drive systems requiring precise motion control, such as in manufacturing automation, packaging industry, or robotic applications. The high rated speed of up to 3600 rpm at 480 V 3-phase supply and the continuous stall torque of 27.8 Nm make it particularly suitable for drives with high demands on torque and speed. The maximum mechanical speed is 4000 rpm, ensuring high operational flexibility.
Functions and Equipment in Detail
The motor features an absolute single-turn SinCos encoder of type Hiperface with a resolution of 128 periods per revolution, equivalent to a position resolution of 131,072 points per revolution. This enables precise feedback of position and speed. The electrical connection is made via a rotatable, angled M40 connector for the motor cable and an angled M23 connector for the encoder cable, ensuring flexible mounting and cable routing. The shaft end is equipped with a keyway, with a shaft diameter of 24 mm and a shaft length of 50 mm. The keyway width is 8 mm.
Technology Explained Simply
The motor winding is optimized for torque and speed, achieving high efficiency under various operating conditions. The torque constant is 1.58 Nm/A at a copper temperature of 120 °C, describing the motor's performance under load. The back-EMF constant is 105 V/krpm at 20 °C, characterizing the electrical response during rotation. The stator inductance is 2.66 mH and the stator resistance is 0.4 Ohm, which are relevant for electrical control and regulation. The rotor inertia is 17.94 kg.cm², describing the rotor's inertia and important for acceleration and braking processes.
Compatibility and Accessories
The servomotor is designed for use with Lexium 62 servo drives and is compatible with the PacDrive 3 platform. Suitable accessories include encoder cables from series VW3E2094R (available in lengths of 5, 10, 15, and 25 m) and motor cable VW3E1145R150. Other compatible components include drives from the Lexium 52 and Lexium 62 series, for example LXM62DC13E21000, LXM62DD27D21000, or LXM52DD72C41000. Mounting is done via an international standard flange with a flange size of 140 mm. The mounting holes have a diameter of 11 mm, arranged in a circle with a diameter of 165 mm, and there are 4 holes in total.
Mounting and Installation
Mounting is done via the standard flange with the specified holes. Cooling is achieved through natural convection, eliminating the need for additional fans or cooling devices. The maximum radial force is 2420 N at 1000 rpm and decreases to 1670 N at 3000 rpm, while the maximum axial force is 300 N. The motor length is 327.5 mm, the center ring diameter is 130 mm, and the depth is 3.5 mm. The motor's protection rating is IP65, protecting it against dust and water jets. The shaft bearing protection rating is IP54, and the shaft bearing is designed without a shaft seal ring.
Operational Advantages
The motor offers high power density in a compact design, reducing space requirements in machines. The high encoder resolution enables precise positioning. The integrated winding technology ensures efficient energy conversion. Natural convection cooling reduces maintenance effort. Compatibility with the PacDrive 3 platform and Lexium 62 drives ensures easy integration into existing automation systems. The maximum operating voltage ranges from 115 V to 480 V with 3-phase supply, allowing flexible use in various networks. The continuous power is 4100 W, with the rated power varying between 1940 W and 4050 W depending on voltage. The motor is designed without an integrated holding brake, which is sufficient for applications without standstill safety. The copper temperature during operation is 130 °C, describing the motor's thermal load capacity. The warranty is 18 months.
Protection Rating and Environmental Conditions
The motor is rated IP65, which is dust-tight and waterproof, suitable for outdoor use or in humid environments. The shaft bearing has an IP54 rating, providing protection against dust and splashing water. The copper operating temperature is 130 °C, describing the motor's thermal load capacity. Cooling is achieved through natural convection, eliminating the need for additional fans.
Compatibility and Application
The servomotor is designed for use with Lexium 62 servo drives and the PacDrive 3 platform. It is suitable for applications requiring high dynamics, precise positioning, and a compact design. The high power density and efficient winding technology ensure optimal performance with minimal space requirements. The integrated encoder technology enables precise feedback of position and speed. Natural convection cooling reduces maintenance effort. The IP65 protection rating makes the motor suitable for use in humid or dusty environments. Compatibility with various Lexium drives ensures flexible integration into existing automation systems. The maximum operating voltage ranges from 115 V to 480 V with 3-phase supply, allowing flexible use in various networks. The continuous power is 4100 W, with the rated power varying between 1940 W and 4050 W depending on voltage. The motor is designed without an integrated holding brake, which is sufficient for applications without standstill safety. The copper temperature during operation is 130 °C, describing the motor's thermal load capacity. The warranty is 18 months.