| Additional features |
| Max. mechanical speed | 4000 rpm |
| [UH,nom] Rated operating voltage | 115 - 480 V |
| Number of power phases | 3-phase supply |
| Standstill continuous current | 13,2 A |
| Continuous torque at standstill | 19.5 Nm at 115-480 V 3-phase supply |
| Continuous power | 3900 W |
| Peak torque at standstill | 60.1 Nm at 115-480 V 3-phase supply |
| [Irms] maximum current | 44,1 A |
| Wave end | Plain shaft |
| Shaft diameter | 24 mm |
| Wavelength | 50 mm |
| Degree of protection (IP) | IP65 motor: corresponds to IEC 60034-5; IP65 shaft bearing: corresponds to IEC 60034-5 |
| Encoder type | Absolute multiturn Hiperface DSL |
| Speed feedback resolution | 262144 points/turn x 4096 turns |
| Hold brake | None |
| Mounting bracket | International standard flange |
| Motor flange size | 140 mm |
| Electrical connection | Rotatable right angled connector |
| Torque constant | 1.47 Nm/A at 120 °C |
| Constant of back electromotive force | 101 V/krpm at 20 °C |
| Number of motor poles | 5 |
| Rotor inertia | 12,68 kg.cm² |
| Stator resistance | 0.6 Ohm |
| Stator inductance | 7,7 mH |
| Cooling type | Natural convection |
| Length | 272,5 mm |
| Diameter of centring ring | 130 mm |
| Depth of centring ring | 3,5 mm |
| Number of mounting holes | 4 |
| Diameter of mounting holes | 11 mm |
| Mounting hole circle diameter | 165 mm |
| Product weight | 16,1 kg |
| Rated reference | SH31402P |
| Copper temperature hot | 130 °C |
| Number of motor stages | 2 |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main features |
| Compatible product family | PacDrive 3 |
| Device short name | SH3 |
| Product or component type | Servomotor |
| Packaging units |
| VPE 1 type | PCE |
| Number of devices per package | 1 |
| VPE 1 height | 26,0 cm |
| VPE 1 width | 20,0 cm |
| VPE 1 length | 59,0 cm |
| Packaging weight (Lbs) | 17,3 kg |
Lexium SH3 Servomotor für die motion-basierte Automatisierung mit PacDrive 3. Diese Reihe an AC-Servomotoren weist ein geringes Rotorträgheitmoment auf, das eine hohe Beschleunigungsfähigkeit für dynamische Anwendung ermöglicht. Dank der Wicklungstechnologie ergibt sich eine höhere Leistungsdichte in kompakter Ausführung. Dieser Servo hat ein Flanschmass von 140 mm und eine Motorlänge von 2 Stacks. Seine Wicklung ist auf das Drehmoment und Drehzahl optimiert. Er verfügt über ein Dauerstillstandsmoment von 19,5 Nm und ein Spitzenmoment von 60,1 Nm. Die spannungsabhängige Nenndrehzahl erreicht 3000 U/min bei einer Nennleistung bis 3,9 kW. Das Wellenende ist als glatte Welle ausgeführt. Der Absolutwert-Encoder ist als Multiturn mit hoher Auflösung von 18 Bit und Übertragung via DSL ausgeführt. Es ist keine Haltebremse integriert. Der Anschluss erfolgt mittels Hybridkabel für OMC (One-Motor-Cable) mit einem M40-Stecker an entsprechende Lexium 62-Servoantriebe. Die Schutzart der Welle und des Gehäuses sind in IP65 ausgeführt.