Schneider Electric SH31401P12F2200, EAN: 3606485297613

Schneider Electric SH31401P12F2200 servo motor 11

Schneider Electric SH31401P12F2200 servo motor 11

Lieske Part No. 1855432
Mfg Part No SH31401P12F2200
EAN-Code 3606485297613
Manufacturer Schneider Electric
Here only 3.559,25 EUR
4.235,51 EUR incl. VAT

Further information for Schneider Electric SH31401P12F2200 servo motor 11

Complementary
Maximum mechanical speed4000 rpm
[Us] rated supply voltage115...480 V
Network number of phasesThree phase
Continuous stall current7.8 A
Continuous stall torque11.1 N.m at 115...480 V three phase
Continuous power2900 W
Peak stall torque27 N.m at 115...480 V three phase
Nominal output power860 W at 115 V single phase; 1670 W at 230 V single phase; 2890 W at 400 V three phase; 3170 W at 480 V three phase
Nominal torque10.95 N.m at 115 V single phase; 10.6 N.m at 230 V single phase; 9.2 N.m at 400 V three phase; 8.4 N.m at 480 V three phase
Nominal speed750 rpm at 115 V single phase; 1500 rpm at 230 V single phase; 3000 rpm at 400 V three phase; 3600 rpm at 480 V three phase
Maximum current Irms20.8 A
Shaft endParallel key
Shaft diameter24 mm
Shaft length50 mm
Key width8 mm
IP degree of protectionIP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5; IP67 housing: conforming to IEC 60034-5
Encoder typeAbsolute multiturn SinCos Hiperface
Speed feedback resolution128 periods
Holding brakeWith
Holding torque23 N.m
Mounting supportInternational standard flange
Motor flange size140 mm
Electrical connectionRotatable right angled connector
Torque constant1.43 N.m/A at 120 °C
Back emf constant100 V/krpm at 20 °C
Number of motor poles5.0
Rotor inertia9.21 kg.cm²
Stator resistance1.41 Ohm
Stator inductance8.17 mH
Maximum radial force Fr1930 N at 1000 rpm; 1530 N at 2000 rpm; 1340 N at 3000 rpm
Maximum axial force Fa300 N
Type of coolingNatural convection
Length255.5 mm
Centring collar diameter130 mm
Centring collar depth3.5 mm
Number of mounting holes4
Mounting holes diameter11 mm
Circle diameter of the mounting holes165 mm
Net weight13 kg
Sizing referenceSH31401P
Temperature copper hot130 °C
Output current 3s peak20.8 A
Inertia1.8 kg.cm² of brake; 7.41 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Logistical informations
Country of originDE
Main
Range compatibilityPacDrive 3
Device short nameSH3
Product or component typeServo motor
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height26.0 cm
Package 1 Width20.0 cm
Package 1 Length59.0 cm
Package 1 Weight13.9 kg
Lexium SH3 servo motor. This SH3 series of AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 11.1 Nm and achieves a peak torque of 27 Nm. Its nominal speed is up to 3600 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 3170 W. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 140 mm for fastening. The drive shaft has a diameter of 24 mm. The shaft end is designed with a feather key and corresponds to protection class IP65. The motor housing corresponds to protection class IP67. A holding brake is integrated. The servo amplifiers from the Lexium series Lexium 52 & Lexium 62 are recommended for operating the synchronous motor.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1855432
qrcode für Schneider Electric SH31401P12F2200 servo motor 11