| Complementary |
| Maximum mechanical speed | 6000 rpm |
| [Us] rated supply voltage | 115...480 V |
| Network number of phases | Three phase |
| Continuous stall current | 6.2 A |
| Continuous stall torque | 10 N.m at 115...480 V three phase |
| Continuous power | 2500 W |
| Peak stall torque | 40.5 N.m at 115...480 V three phase |
| Nominal output power | 1490 W at 230 V single phase; 2480 W at 400 V three phase; 2480 W at 480 V three phase |
| Nominal torque | 9.5 N.m at 230 V single phase; 7.9 N.m at 400 V three phase; 6.9 N.m at 480 V three phase |
| Nominal speed | 1500 rpm at 230 V single phase; 3000 rpm at 400 V three phase; 3600 rpm at 480 V three phase |
| Maximum current Irms | 32.3 A |
| Shaft end | Parallel key |
| Shaft diameter | 24 mm |
| Shaft length | 50 mm |
| Key width | 8 mm |
| IP degree of protection | IP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5 |
| Encoder type | Absolute multiturn Hiperface DSL |
| Speed feedback resolution | 262144 points/turn x 4096 turns |
| Holding brake | Without |
| Mounting support | International standard flange |
| Motor flange size | 100 mm |
| Electrical connection | Rotatable right angled connector |
| Torque constant | 1.62 N.m/A at 120 °C |
| Back emf constant | 103 V/krpm at 20 °C |
| Number of motor poles | 4.0 |
| Rotor inertia | 4.22 kg.cm² |
| Stator resistance | 1.8 Ohm |
| Stator inductance | 13 mH |
| Maximum radial force Fr | 145 N at 1000 rpm; 115 N at 2000 rpm; 100 N at 3000 rpm |
| Maximum axial force Fa | 20 N |
| Type of cooling | Natural convection |
| Length | 276.5 mm |
| Centring collar diameter | 95 mm |
| Centring collar depth | 3.5 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 9.0 mm |
| Circle diameter of the mounting holes | 115 mm |
| Net weight | 9.1 kg |
| Sizing reference | SH31004P |
| Temperature copper hot | 130 °C |
| Output current 3s peak | 32.3 A |
| Inertia | 0.0 kg.cm² of brake; 0.0 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Range compatibility | PacDrive 3 |
| Device short name | SH3 |
| Product or component type | Servo motor |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 26.0 cm |
| Package 1 Width | 20.0 cm |
| Package 1 Length | 59.0 cm |
| Package 1 Weight | 10.2 kg |