Schneider Electric SH31004P01F2100, EAN: 3606485297248

Schneider Electric SH31004P01F2100 servo motor 10 Nm without key

Schneider Electric SH31004P01F2100 servo motor 10 Nm without key

Lieske Part No. 1855405
Mfg Part No SH31004P01F2100
EAN-Code 3606485297248
Manufacturer Schneider Electric
Here only 2.609,35 EUR
3.105,13 EUR incl. VAT

Further information for Schneider Electric SH31004P01F2100 servo motor 10 Nm without key

Complementary
Maximum mechanical speed6000 rpm
[Us] rated supply voltage115...480 V
Network number of phasesThree phase
Continuous stall current6.2 A
Continuous stall torque10 N.m at 115...480 V three phase
Continuous power2500 W
Peak stall torque40.5 N.m at 115...480 V three phase
Nominal output power780 W at 115 V single phase; 1490 W at 230 V single phase; 2480 W at 400 V three phase; 2600 W at 480 V three phase
Nominal torque9.9 N.m at 115 V single phase; 9.5 N.m at 230 V single phase; 7.9 N.m at 400 V three phase; 6.9 N.m at 480 V three phase
Nominal speed750 rpm at 115 V single phase; 1500 rpm at 230 V single phase; 3000 rpm at 400 V three phase; 3600 rpm at 480 V three phase
Maximum current Irms32.3 A
Shaft endSmooth shaft
Shaft diameter24 mm
Shaft length50 mm
IP degree of protectionIP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5
Encoder typeAbsolute single turn SinCos Hiperface
Speed feedback resolution128 periods
Holding brakeWith
Holding torque12 N.m
Mounting supportInternational standard flange
Motor flange size100 mm
Electrical connectionStraight connector
Torque constant1.62 N.m/A at 120 °C
Back emf constant103 V/krpm at 20 °C
Number of motor poles4.0
Rotor inertia5.245 kg.cm²
Stator resistance1.81 Ohm
Stator inductance6.5 mH
Maximum radial force Fr1070 N at 1000 rpm; 850 N at 2000 rpm; 740 N at 3000 rpm
Maximum axial force Fa160 N
Type of coolingNatural convection
Length307.5 mm
Centring collar diameter95 mm
Centring collar depth3.5 mm
Number of mounting holes4
Mounting holes diameter9.0 mm
Circle diameter of the mounting holes115 mm
Net weight9.9 kg
Sizing referenceSH31004P
Temperature copper hot130 °C
Number of motor stacks4
Output current 3s peak32.3 A
Inertia1.025 kg.cm² of brake; 4.22 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Main
Range compatibilityPacDrive 3
Device short nameSH3
Product or component typeServo motor
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height26.0 cm
Package 1 Width20.0 cm
Package 1 Length59.0 cm
Package 1 Weight10.7 kg
Lexium SH3 servo motor. This SH3 series of AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 10 Nm and achieves a peak torque of 40.5 Nm. Its nominal speed is up to 3600 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 2.6 kW. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 100 mm for fastening. The drive shaft has a diameter of 24 mm. The shaft end is smooth and corresponds to protection class IP65. The motor housing has protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium series Lexium 52 & Lexium 62 are recommended for operating the synchronous motor.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1855405
qrcode für Schneider Electric SH31004P01F2100 servo motor 10 Nm without key