Schneider Electric SH31002P02F2000, EAN: 3606485296715

Schneider Electric SH31002P02F2000 servo motor 5,8 Nm with brake

Schneider Electric SH31002P02F2000 servo motor 5,8 Nm with brake

Lieske Part No. 1331983
Mfg Part No SH31002P02F2000
EAN-Code 3606485296715
Manufacturer Schneider Electric
Here only 2.158,55 EUR
2.568,67 EUR incl. VAT

Further information for Schneider Electric SH31002P02F2000 servo motor 5,8 Nm with brake

Complementary
Maximum mechanical speed6000 rpm
[Us] rated supply voltage115...480 V
Network number of phasesThree phase
Continuous stall current4.8 A
Continuous stall torque5.8 N.m at 115...480 V three phase
Continuous power1900 W
Peak stall torque18.3 N.m at 115...480 V three phase
Nominal output power580 W at 115 V single phase; 1090 W at 230 V single phase; 1930 W at 400 V three phase; 2210 W at 480 V three phase
Nominal torque5.5 N.m at 115 V single phase; 5.2 N.m at 230 V single phase; 4.6 N.m at 400 V three phase; 4.4 N.m at 480 V three phase
Nominal speed1000 rpm at 115 V single phase; 2000 rpm at 230 V single phase; 4000 rpm at 400 V three phase; 4800 rpm at 480 V three phase
Maximum current Irms17.1 A
Shaft endSmooth shaft
Shaft diameter19 mm
Shaft length40 mm
IP degree of protectionIP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5; IP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5
Encoder typeAbsolute multiturn SinCos Hiperface
Speed feedback resolution128 periods
Holding brakeWith
Holding torque9 N.m
Mounting supportInternational standard flange
Motor flange size100 mm
Electrical connectionRotatable right angled connector
Torque constant1.21 N.m/A at 120 °C
Back emf constant77 V/krpm at 20 °C
Number of motor poles4.0
Rotor inertia2.928 kg.cm²
Stator resistance2.4 Ohm
Stator inductance6.75 mH
Maximum radial force Fr990 N at 1000 rpm; 790 N at 2000 rpm; 690 N at 3000 rpm; 620 N at 4000 rpm
Maximum axial force Fa160 N
Type of coolingNatural convection
Length234.5 mm
Centring collar diameter95 mm
Centring collar depth3.5 mm
Number of mounting holes4
Mounting holes diameter9.0 mm
Circle diameter of the mounting holes115 mm
Net weight6.3 kg
Sizing referenceSH31002P
Temperature copper hot130 °C
Output current 3s peak17.1 A
Inertia0.618 kg.cm² of brake; 2.31 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Logistical informations
Country of originDE
Main
Range compatibilityPacDrive 3
Device short nameSH3
Product or component typeServo motor
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height19.3 cm
Package 1 Width22.0 cm
Package 1 Length40.0 cm
Package 1 Weight7.553 kg
Unit Type of Package 2P06
Number of Units in Package 212
Package 2 Height45.0 cm
Package 2 Width80.0 cm
Package 2 Length60.0 cm
Package 2 Weight99.136 kg
Lexium SH3 servo motor. This SH3 series of AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 5.8 Nm and achieves a peak torque of 18.3 Nm. Its nominal speed is up to 4800 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 2210 W. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 100 mm for fastening. The drive shaft has a diameter of 19 mm. The shaft end is smooth and corresponds to protection class IP54. The motor housing has protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium series Lexium 52 & Lexium 62 are recommended for operating the synchronous motor.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1331983
qrcode für Schneider Electric SH31002P02F2000 servo motor 5,8 Nm with brake