Schneider Electric SH31001P11F2000, EAN: 3606485296531

Schneider Electric SH31001P11F2000 servo motor 3

Schneider Electric SH31001P11F2000 servo motor 3

Lieske Part No. 1855812
Mfg Part No SH31001P11F2000
EAN-Code 3606485296531
Manufacturer Schneider Electric
Here only 1.665,20 EUR
1.981,59 EUR incl. VAT

Further information for Schneider Electric SH31001P11F2000 servo motor 3

Complementary
Maximum mechanical speed6000 rpm
[Us] rated supply voltage115...480 V
Network number of phasesThree phase
Continuous stall current3.5 A
Continuous stall torque2.94 N.m at 115...480 V three phase
Continuous power1190 W
Peak stall torque9.6 N.m at 115...480 V three phase
Nominal output power410 W at 115 V single phase; 790 W at 230 V single phase; 1410 W at 400 V three phase; 1630 W at 480 V three phase
Nominal torque2.91 N.m at 115 V single phase; 2.64 N.m at 230 V single phase; 2.27 N.m at 400 V three phase; 2.27 N.m at 480 V three phase
Nominal speed1250 rpm at 115 V single phase; 2500 rpm at 230 V single phase; 5000 rpm at 400 V three phase; 6000 rpm at 480 V three phase
Maximum current Irms12.0 A
Shaft endParallel key
Shaft diameter19 mm
Shaft length40 mm
Key width6 mm
IP degree of protectionIP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5; IP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5
Encoder typeAbsolute single turn SinCos Hiperface
Speed feedback resolution128 periods
Holding brakeWith
Holding torque9 N.m
Mounting supportInternational standard flange
Motor flange size100 mm
Electrical connectionRotatable right angled connector
Torque constant0.84 N.m/A at 120 °C
Back emf constant60 V/krpm at 20 °C
Number of motor poles4.0
Rotor inertia2.018 kg.cm²
Stator resistance3.8 Ohm
Stator inductance9.5 mH
Maximum radial force Fr900 N at 1000 rpm; 720 N at 2000 rpm; 630 N at 3000 rpm; 570 N at 4000 rpm; 530 N at 5000 rpm
Maximum axial force Fa160 N
Type of coolingNatural convection
Length199.5 mm
Centring collar diameter95 mm
Centring collar depth3.5 mm
Number of mounting holes4
Mounting holes diameter9.0 mm
Circle diameter of the mounting holes115 mm
Net weight4.8 kg
Sizing referenceSH31001P
Temperature copper hot130 °C
Number of motor stacks1
Output current 3s peak12.0 A
Inertia0.618 kg.cm² of brake; 1.4 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Logistical informations
Country of originDE
Main
Range compatibilityPacDrive 3
Device short nameSH3
Product or component typeServo motor
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height22.352 cm
Package 1 Width19.558 cm
Package 1 Length39.878 cm
Package 1 Weight5.874 kg
Lexium SH3 servo motor. This SH3 series of AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 3.3 Nm and achieves a peak torque of 9.6 Nm. Its nominal speed is up to 6000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 1630 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 100 mm for fastening. The drive shaft has a diameter of 19 mm. The shaft end is designed with a feather key and corresponds to protection class IP54. The motor housing has protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium series Lexium 52 & Lexium 62 are recommended for operating the synchronous motor.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1855812
qrcode für Schneider Electric SH31001P11F2000 servo motor 3