Schneider Electric SH30703P01F2000, EAN: 3606485296166

Schneider Electric SH30703P01F2000 servo motor 3,1 Nm without key

Schneider Electric SH30703P01F2000 servo motor 3,1 Nm without key

Lieske Part No. 1565426
Mfg Part No SH30703P01F2000
EAN-Code 3606485296166
Manufacturer Schneider Electric
Here only 1.570,90 EUR
1.869,37 EUR incl. VAT

Further information for Schneider Electric SH30703P01F2000 servo motor 3,1 Nm without key

Complementary
Maximum mechanical speed8000 rpm
[Us] rated supply voltage115...480 V
Network number of phasesThree phase
Continuous stall current4.1 A
Continuous stall torque2.94 N.m at 115...480 V three phase
Continuous power1330 W
Peak stall torque11.3 N.m at 115...480 V three phase
Nominal output power460 W at 115 V single phase; 880 W at 230 V single phase; 1450 W at 400 V three phase; 1550 W at 480 V three phase
Nominal torque2.95 N.m at 115 V single phase; 2.8 N.m at 230 V single phase; 2.1 N.m at 400 V three phase; 2.1 N.m at 480 V three phase
Nominal speed1500 rpm at 115 V single phase; 3000 rpm at 230 V single phase; 6000 rpm at 400 V three phase; 7200 rpm at 480 V three phase
Maximum current Irms17.0 A
Shaft endSmooth shaft
Shaft diameter14 mm
Shaft length30 mm
IP degree of protectionIP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5; IP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5
Encoder typeAbsolute single turn SinCos Hiperface
Speed feedback resolution128 periods
Holding brakeWith
Holding torque3 N.m
Mounting supportInternational standard flange
Motor flange size70 mm
Electrical connectionStraight connector
Torque constant0.72 N.m/A at 120 °C
Back emf constant49 V/krpm at 20 °C
Number of motor poles3.0
Rotor inertia0.807 kg.cm²
Stator resistance2.7 Ohm
Stator inductance20.3 mH
Maximum radial force Fr730 N at 1000 rpm; 580 N at 2000 rpm; 510 N at 3000 rpm; 460 N at 4000 rpm; 430 N at 5000 rpm; 400 N at 6000 rpm
Maximum axial force Fa80 N
Type of coolingNatural convection
Length254 mm
Centring collar diameter60 mm
Centring collar depth2.5 mm
Number of mounting holes4
Mounting holes diameter5.5 mm
Circle diameter of the mounting holes82 mm
Net weight3.8 kg
Sizing referenceSH30703P
Temperature copper hot130 °C
Output current 3s peak17.0 A
Inertia0.11 kg.cm² of brake; 0.0 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Logistical informations
Country of originDE
Main
Range compatibilityPacDrive 3
Device short nameSH3
Product or component typeServo motor
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height11.000 cm
Package 1 Width19.000 cm
Package 1 Length39.500 cm
Package 1 Weight4.457 kg
Unit Type of Package 2S04
Number of Units in Package 23
Package 2 Height30 cm
Package 2 Width40 cm
Package 2 Length60 cm
Package 2 Weight14.008 kg
Unit Type of Package 3P06
Number of Units in Package 312
Package 3 Height75.000 cm
Package 3 Width80.000 cm
Package 3 Length60.000 cm
Package 3 Weight64.032 kg
Lexium SH3 servo motor. This SH3 series of AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 3.1 Nm and achieves a peak torque of 11.3 Nm. Its nominal speed is up to 7200 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 1550 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 70 mm for fastening. The drive shaft has a diameter of 14 mm. The shaft end is smooth and corresponds to protection class IP54. The motor housing has protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium series Lexium 52 & Lexium 62 are recommended for operating the synchronous motor.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1565426
qrcode für Schneider Electric SH30703P01F2000 servo motor 3,1 Nm without key