| Complementary |
| Maximum mechanical speed | 8000 rpm |
| [Us] rated supply voltage | 115...480 V |
| Network number of phases | Three phase |
| Continuous stall current | 2.9 A |
| Continuous stall torque | 2.04 N.m at 115...480 V three phase |
| Continuous power | 1130 W |
| Peak stall torque | 7.6 N.m at 115...480 V three phase |
| Nominal output power | 610 W at 230 V single phase; 1130 W at 400 V three phase; 1130 W at 480 V three phase |
| Nominal torque | 2.1 N.m at 230 V single phase; 1.8 N.m at 400 V three phase; 1.8 N.m at 480 V three phase |
| Nominal speed | 3000 rpm at 230 V single phase; 6000 rpm at 400 V three phase; 7200 rpm at 480 V three phase |
| Maximum current Irms | 11.8 A |
| Shaft end | Smooth shaft |
| Shaft diameter | 11 mm |
| Shaft length | 23 mm |
| IP degree of protection | IP65 motor: conforming to IEC 60034-5; IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 |
| Encoder type | Absolute multiturn Hiperface DSL |
| Speed feedback resolution | 262144 points/turn x 4096 turns |
| Holding brake | Without |
| Mounting support | International standard flange |
| Motor flange size | 70 mm |
| Electrical connection | Rotatable right angled connector |
| Torque constant | 0.7 N.m/A at 120 °C |
| Back emf constant | 48 V/krpm at 20 °C |
| Number of motor poles | 3.0 |
| Rotor inertia | 0.410 kg.cm² |
| Stator resistance | 4.2 Ohm |
| Stator inductance | 10.65 mH |
| Maximum radial force Fr | 990 N at 1000 rpm |
| Maximum axial force Fa | 160 N |
| Type of cooling | Natural convection |
| Length | 187 mm |
| Centring collar diameter | 60 mm |
| Centring collar depth | 2.5 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 5.5 mm |
| Circle diameter of the mounting holes | 82 mm |
| Net weight | 2.8 kg |
| Sizing reference | SH30702P |
| Temperature copper hot | 130 °C |
| Number of motor stacks | 2 |
| Output current 3s peak | 11.8 A |
| Inertia | 0.0 kg.cm² of brake; 0.41 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Range compatibility | PacDrive 3 |
| Device short name | SH3 |
| Product or component type | Servo motor |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 11.500 cm |
| Package 1 Width | 19.000 cm |
| Package 1 Length | 39.700 cm |
| Package 1 Weight | 3.146 kg |
Lexium SH3 Servomotor für die motion-basierte Automatisierung mit PacDrive 3. Diese Reihe an AC-Servomotoren weist ein geringes Rotorträgheitmoment auf, das eine hohe Beschleunigungsfähigkeit für dynamische Anwendung ermöglicht. Dank der Wicklungstechnologie ergibt sich eine höhere Leistungsdichte in kompakter Ausführung. Dieser Servo hat ein Flanschmass von 70 mm und eine Motorlänge von 2 Stacks. Seine Wicklung ist auf das Drehmoment und Drehzahl optimiert. Er verfügt über ein Dauerstillstandsmoment von 2,04 Nm und ein Spitzenmoment von 7,6 Nm. Die spannungsabhängige Nenndrehzahl erreicht 6000 U/min bei einer Nennleistung bis 1,13 kW. Das Wellenende ist als glatte Welle ausgeführt. Der Absolutwert-Encoder ist als Multiturn mit hoher Auflösung von 18 Bit und Übertragung via DSL ausgeführt. Es ist keine Haltebremse integriert. Der Anschluss erfolgt mittels Hybridkabel für OMC (One-Motor-Cable) mit einem M23-Stecker an entsprechende Lexium 62-Servoantriebe. Die Schutzart der Welle ist in IP54 und des Gehäuses in IP65 ausgeführt.