Schneider Electric SH30702P02F2100, EAN: 3606485296012

Schneider Electric SH30702P02F2100 servo motor 2.2 Nm with brake

Schneider Electric SH30702P02F2100 servo motor 2.2 Nm with brake

Lieske Part No. 1565427
Mfg Part No SH30702P02F2100
EAN-Code 3606485296012
Manufacturer Schneider Electric
Here only 1.904,40 EUR
2.266,24 EUR incl. VAT

Further information for Schneider Electric SH30702P02F2100 servo motor 2.2 Nm with brake

Complementary
Maximum mechanical speed8000 rpm
[Us] rated supply voltage115...480 V
Network number of phasesThree phase
Continuous stall current2.9 A
Continuous stall torque2.04 N.m at 115...480 V three phase
Continuous power1130 W
Peak stall torque7.6 N.m at 115...480 V three phase
Nominal output power340 W at 115 V single phase; 660 W at 230 V single phase; 1190 W at 400 V three phase; 1360 W at 480 V three phase
Nominal torque2.15 N.m at 115 V single phase; 2.1 N.m at 230 V single phase; 1.8 N.m at 400 V three phase; 1.8 N.m at 480 V three phase
Nominal speed1500 rpm at 115 V single phase; 3000 rpm at 230 V single phase; 6000 rpm at 400 V three phase; 7200 rpm at 480 V three phase
Maximum current Irms11.8 A
Shaft endSmooth shaft
Shaft diameter11 mm
Shaft length23 mm
IP degree of protectionIP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5
Encoder typeAbsolute multiturn SinCos Hiperface
Speed feedback resolution128 periods
Holding brakeWith
Holding torque3 N.m
Mounting supportInternational standard flange
Motor flange size70 mm
Electrical connectionStraight connector
Torque constant0.7 N.m/A at 120 °C
Back emf constant48 V/krpm at 20 °C
Number of motor poles3.0
Rotor inertia0.482 kg.cm²
Stator resistance4.2 Ohm
Stator inductance29.65 mH
Maximum radial force Fr710 N at 1000 rpm; 560 N at 2000 rpm; 490 N at 3000 rpm; 450 N at 4000 rpm; 410 N at 5000 rpm; 390 N at 6000 rpm
Maximum axial force Fa80 N
Type of coolingNatural convection
Length212.5 mm
Centring collar diameter60 mm
Centring collar depth2.5 mm
Number of mounting holes4
Mounting holes diameter5.5 mm
Circle diameter of the mounting holes82 mm
Net weight3 kg
Sizing referenceSH30702P
Temperature copper hot130 °C
Output current 3s peak11.8 A
Inertia0.11 kg.cm² of brake; 0.0 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Logistical informations
Country of originDE
Main
Range compatibilityPacDrive 3
Device short nameSH3
Product or component typeServo motor
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height11.176 cm
Package 1 Width18.796 cm
Package 1 Length39.370 cm
Package 1 Weight3.679 kg
Lexium SH3 servo motor. This SH3 series of AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 2.2 Nm and achieves a peak torque of 7.6 Nm. Its nominal speed is up to 7200 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 1360 W. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 70 mm for fastening. The drive shaft has a diameter of 11 mm. The shaft end is smooth and corresponds to protection class IP65. The motor housing has protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium series Lexium 52 & Lexium 62 are recommended for operating the synchronous motor.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1565427
qrcode für Schneider Electric SH30702P02F2100 servo motor 2.2 Nm with brake