Schneider Electric SH30701P11A2000, EAN: 3606485295794

Schneider Electric SH30701P11A2000 servo motor 1.4 Nm

Schneider Electric SH30701P11A2000 servo motor 1.4 Nm

Lieske Part No. 1331941
Mfg Part No SH30701P11A2000
EAN-Code 3606485295794
Manufacturer Schneider Electric
Here only 1.160,35 EUR
1.380,82 EUR incl. VAT

Further information for Schneider Electric SH30701P11A2000 servo motor 1.4 Nm

Complementary
Maximum mechanical speed8000 rpm
[Us] rated supply voltage115...480 V
Network number of phasesThree phase
Continuous stall current1.8 A
Continuous stall torque1.25 N.m at 115...480 V three phase
Continuous power690 W
Peak stall torque3.5 N.m at 115...480 V three phase
Nominal output power220 W at 115 V single phase; 440 W at 230 V single phase; 820 W at 400 V three phase; 950 W at 480 V three phase
Nominal torque1.4 N.m at 115 V single phase; 1.4 N.m at 230 V single phase; 1.1 N.m at 400 V three phase; 1.1 N.m at 480 V three phase
Nominal speed1500 rpm at 115 V single phase; 3000 rpm at 230 V single phase; 6000 rpm at 400 V three phase; 7200 rpm at 480 V three phase
Maximum current Irms5.7 A
Shaft endParallel key
Shaft diameter11 mm
Shaft length23 mm
Key width4 mm
IP degree of protectionIP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5; IP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5
Encoder typeAbsolute single turn SinCos Hiperface
Speed feedback resolution128 periods
Holding brakeWithout
Mounting supportInternational standard flange
Motor flange size70 mm
Electrical connectionStraight connector
Torque constant0.69 N.m/A at 120 °C
Back emf constant46 V/krpm at 20 °C
Number of motor poles3.0
Rotor inertia0.25 kg.cm²
Stator resistance10.4 Ohm
Stator inductance21.3 mH
Maximum radial force Fr660 N at 1000 rpm; 520 N at 2000 rpm; 460 N at 3000 rpm; 410 N at 4000 rpm; 380 N at 5000 rpm; 360 N at 6000 rpm
Maximum axial force Fa80 N
Type of coolingNatural convection
Length154 mm
Centring collar diameter60 mm
Centring collar depth2.5 mm
Number of mounting holes4
Mounting holes diameter5.5 mm
Circle diameter of the mounting holes82 mm
Net weight2.1 kg
Sizing referenceSH30701P
Temperature copper hot130 °C
Output current 3s peak5.7 A
Inertia0.0 kg.cm² of brake; 0.25 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Logistical informations
Country of originDE
Main
Range compatibilityPacDrive 3
Device short nameSH3
Product or component typeServo motor
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height11.430 cm
Package 1 Width18.796 cm
Package 1 Length39.370 cm
Package 1 Weight2.522 kg
Lexium SH3 servo motor. This SH3 series of AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 1.4 Nm and achieves a peak torque of 3.5 Nm. Its nominal speed is up to 7200 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 950 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 70 mm for fastening. The drive shaft has a diameter of 11 mm. The shaft end is designed with a feather key and corresponds to protection class IP54. The motor housing has protection class IP65. There is no holding brake. The servo amplifiers from the Lexium series Lexium 52 & Lexium 62 are recommended for operating the synchronous motor.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1331941
qrcode für Schneider Electric SH30701P11A2000 servo motor 1.4 Nm