| Complementary |
| Maximum mechanical speed | 9000 rpm |
| [Us] rated supply voltage | 115...480 V |
| Network number of phases | Three phase |
| Continuous stall current | 1.2 A |
| Continuous stall torque | 0.71 N.m at 115...480 V three phase |
| Continuous power | 530 W |
| Peak stall torque | 2.5 N.m at 115...480 V three phase |
| Nominal output power | 160 W at 115 V single phase; 310 W at 230 V single phase; 600 W at 400 V three phase; 670 W at 480 V three phase |
| Nominal torque | 0.77 N.m at 115 V single phase; 0.75 N.m at 230 V single phase; 0.63 N.m at 400 V three phase; 0.63 N.m at 480 V three phase |
| Nominal speed | 2000 rpm at 115 V single phase; 4000 rpm at 230 V single phase; 8000 rpm at 400 V three phase; 8000 rpm at 480 V three phase |
| Maximum current Irms | 4.8 A |
| Shaft end | Parallel key |
| Shaft diameter | 9 mm |
| Shaft length | 20 mm |
| Key width | 3 mm |
| IP degree of protection | IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5; IP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5 |
| Encoder type | Absolute multiturn SinCos Hiperface |
| Speed feedback resolution | 128 periods |
| Holding brake | Without |
| Mounting support | International standard flange |
| Motor flange size | 55 mm |
| Electrical connection | Rotatable right angled connector |
| Torque constant | 0.59 N.m/A at 120 °C |
| Back emf constant | 40 V/krpm at 20 °C |
| Number of motor poles | 3.0 |
| Rotor inertia | 0.096 kg.cm² |
| Stator resistance | 17.4 Ohm |
| Stator inductance | 18.2 mH |
| Maximum radial force Fr | 370 N at 1000 rpm; 290 N at 2000 rpm; 260 N at 3000 rpm; 230 N at 4000 rpm; 220 N at 5000 rpm; 200 N at 6000 rpm; 190 N at 7000 rpm; 190 N at 8000 rpm |
| Maximum axial force Fa | 40 N |
| Type of cooling | Natural convection |
| Length | 154.4 mm |
| Centring collar diameter | 40 mm |
| Centring collar depth | 2 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 5.5 mm |
| Circle diameter of the mounting holes | 63 mm |
| Net weight | 1.5 kg |
| Sizing reference | SH30552P |
| Temperature copper hot | 130 °C |
| Output current 3s peak | 4.8 A |
| Inertia | 0.0 kg.cm² of brake; 0.096 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Range compatibility | PacDrive 3 |
| Device short name | SH3 |
| Product or component type | Servo motor |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 11.000 cm |
| Package 1 Width | 19.000 cm |
| Package 1 Length | 39.500 cm |
| Package 1 Weight | 1.917 kg |
| Unit Type of Package 2 | S04 |
| Number of Units in Package 2 | 4 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 40.000 cm |
| Package 2 Length | 60.000 cm |
| Package 2 Weight | 8.318 kg |
| Unit Type of Package 3 | P12 |
| Number of Units in Package 3 | 16 |
| Package 3 Height | 45.000 cm |
| Package 3 Width | 80.000 cm |
| Package 3 Length | 120.000 cm |
| Package 3 Weight | 45.272 kg |
The Schneider Electric servomotor SH30552P12A2000 belongs to the SH3 series and is designed for motion-based automation within the PacDrive 3 platform. It is an AC servomotor with a compact design, featuring low rotor inertia of 0.096 kg.cm², enabling high acceleration capabilities for dynamic applications. The winding technology ensures increased power density, allowing the motor to achieve high performance parameters despite its compact dimensions. The motor features a 55 mm flange and a motor length of two stacks, making it suitable for standard mounting requirements.
Applications
The SH30552P12A2000 is intended for applications in industrial automation, particularly in machine building, packaging technology, and positioning drives, where precise motion control and high dynamics are required. The high rated speed of up to 8000 rpm at a rated power of up to 670 W (depending on supply voltage) makes it suitable for fast, precise motion sequences. The maximum mechanical speed is 9000 rpm, supporting its use in highly dynamic systems.
Functions and Equipment in Detail
The motor is equipped with an absolute multiturn encoder of the SinCos Hiperface type, offering a resolution of 128 periods per revolution. This corresponds to a positioning accuracy of 131,072 points per revolution, ensuring high precision in motion control. The shaft end is designed with a keyway and a shaft diameter of 9 mm, with a shaft length of 20 mm. The shaft bearing protection class is IP54, while the motor housing has an IP65 protection class, providing high dust and splash water protection for industrial environments.
Technology Explained Simply
The motor operates on a 3-phase supply with a rated voltage of 115 to 480 V. The continuous power is 530 W, while the rated output power at the shaft varies depending on voltage: 160 W at 115 V, 310 W at 230 V, 600 W at 400 V, and 670 W at 480 V. The continuous holding torque is 0.71 Nm, and the peak holding torque is 2.5 Nm. The torque constant is 0.59 Nm/A at 120 °C, and the back-EMF constant is 40 V/krpm at 20 °C. Cooling is achieved through natural convection, enabling a maintenance-friendly operation.
Compatibility and Accessories
The servomotor is designed for use with Lexium series servo drives (Lexium 52 and Lexium 62). Electrical connection is made via two rotatable, angled M23 connectors, allowing flexible connection design. Compatible accessories include motor cables such as VW3E1143R050 or VW3E1143R100, and encoder cables such as VW3E2094R050 or VW3E2094R100. These cables are designed for connection to the drive system and ensure reliable signal transmission.
Mounting and Installation
Mounting is done via the international standard flange with a flange diameter of 55 mm. The mounting holes have a diameter of 5.5 mm and are arranged on a circle with a diameter of 63 mm. There are four mounting holes, enabling stable fixation. The maximum radial force is 370 N at 1000 rpm and decreases with increasing speed, while the maximum axial force is 40 N. The connection connectors are rotatable, allowing flexible positioning of the motor in machine building.
Operational Advantages
The motor features high power density, low rotor inertia, and a robust construction. The integrated SinCos multiturn encoder technology ensures precise position detection even after power failure. The IP65 protection class for the housing and IP54 for the shaft bearing allow use in dirty or humid environments. Natural convection cooling reduces maintenance requirements. Compatibility with Lexium drives and the use of standardized connectors simplify integration into existing automation systems.
Note on Brake
The motor does not feature an integrated holding brake. For applications requiring position holding at standstill, an external brake or appropriate control concept must be provided.
Compatibility with Drive Systems
The motor is specifically developed for use with Lexium 52 and Lexium 62 series servo drives. Connection is made via rotatable, angled M23 connectors, providing flexible and secure connection options. The use of compatible motor cables and encoder cables (e.g. VW3E1143R050, VW3E2094R050) ensures reliable signal transmission and mechanical stability.
Note on Brake
The motor does not feature an integrated holding brake. For applications requiring position holding at standstill, an external brake or appropriate control concept must be provided.
Compatibility with Drive Systems
The motor is specifically developed for use with Lexium 52 and Lexium 62 series servo drives. Connection is made via rotatable, angled M23 connectors, providing flexible and secure connection options. The use of compatible motor cables and encoder cables (e.g. VW3E1143R050, VW3E2094R050) ensures reliable signal transmission and mechanical stability.