Schneider Electric SH30552P02F2100, EAN: 3606485295312

Schneider Electric SH30552P02F2100 servo motor 0

Schneider Electric SH30552P02F2100 servo motor 0

Lieske Part No. 1855876
Mfg Part No SH30552P02F2100
EAN-Code 3606485295312
Manufacturer Schneider Electric
Here only 1.696,25 EUR
2.018,54 EUR incl. VAT

Further information for Schneider Electric SH30552P02F2100 servo motor 0

Complementary
Maximum mechanical speed9000 rpm
[Us] rated supply voltage115...480 V
Network number of phasesThree phase
Continuous stall current1.2 A
Continuous stall torque0.71 N.m at 115...480 V three phase
Continuous power530 W
Peak stall torque2.5 N.m at 115...480 V three phase
Nominal output power160 W at 115 V single phase; 310 W at 230 V single phase; 600 W at 400 V three phase; 670 W at 480 V three phase
Nominal torque0.77 N.m at 115 V single phase; 0.75 N.m at 230 V single phase; 0.63 N.m at 400 V three phase; 0.63 N.m at 480 V three phase
Nominal speed2000 rpm at 115 V single phase; 4000 rpm at 230 V single phase; 6000 rpm at 400 V three phase; 6000 rpm at 480 V three phase
Maximum current Irms4.8 A
Shaft endSmooth shaft
Shaft diameter9 mm
Shaft length20 mm
IP degree of protectionIP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5
Encoder typeAbsolute multiturn SinCos Hiperface
Speed feedback resolution128 periods
Holding brakeWith
Holding torque0.8 N.m
Mounting supportInternational standard flange
Motor flange size55 mm
Electrical connectionRotatable right angled connector
Torque constant0.59 N.m/A at 120 °C
Back emf constant40 V/krpm at 20 °C
Number of motor poles3.0
Rotor inertia0.117 kg.cm²
Stator resistance17.4 Ohm
Stator inductance18.2 mH
Maximum radial force Fr370 N at 1000 rpm; 290 N at 2000 rpm; 260 N at 3000 rpm; 230 N at 4000 rpm; 220 N at 5000 rpm; 200 N at 6000 rpm; 190 N at 7000 rpm; 190 N at 8000 rpm
Maximum axial force Fa40 N
Type of coolingNatural convection
Length181 mm
Centring collar diameter40 mm
Centring collar depth2 mm
Number of mounting holes4
Mounting holes diameter5.5 mm
Circle diameter of the mounting holes63 mm
Net weight1.6 kg
Sizing referenceSH30552P
Temperature copper hot130 °C
Number of motor stacks2
Output current 3s peak4.8 A
Inertia0.021 kg.cm² of brake; 0.096 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Main
Range compatibilityPacDrive 3
Device short nameSH3
Product or component typeServo motor
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height11.5 cm
Package 1 Width19.0 cm
Package 1 Length39.5 cm
Package 1 Weight1.97 kg
Lexium SH3 servo motor. This SH3 series of AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 0.8 Nm and achieves a peak torque of 2.5 Nm. Its nominal speed is up to 9000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 670 W. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 55 mm for fastening. The drive shaft has a diameter of 9 mm. The shaft end is smooth and corresponds to protection class IP65. The motor housing has protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium series Lexium 52 & Lexium 62 are recommended for operating the synchronous motor.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1855876
qrcode für Schneider Electric SH30552P02F2100 servo motor 0