| Complementary |
| Maximum mechanical speed | 9000 rpm |
| [Us] rated supply voltage | 115...480 V |
| Network number of phases | Three phase |
| Continuous stall current | 0.73 A |
| Continuous stall torque | 0.42 N.m at 115...480 V three phase |
| Continuous power | 290 W |
| Peak stall torque | 1.5 N.m at 115...480 V three phase |
| Nominal output power | 100 W at 115 V single phase; 210 W at 230 V single phase; 400 W at 400 V three phase; 440 W at 480 V three phase |
| Nominal torque | 0.5 N.m at 115 V single phase; 0.5 N.m at 230 V single phase; 0.35 N.m at 400 V three phase; 0.35 N.m at 480 V three phase |
| Nominal speed | 2000 rpm at 115 V single phase; 4000 rpm at 230 V single phase; 8000 rpm at 400 V three phase; 8000 rpm at 480 V three phase |
| Maximum current Irms | 2.9 A |
| Shaft end | Smooth shaft |
| Shaft diameter | 9 mm |
| Shaft length | 20 mm |
| IP degree of protection | IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5; IP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5 |
| Encoder type | Absolute single turn SinCos Hiperface |
| Speed feedback resolution | 128 periods |
| Holding brake | With |
| Holding torque | 0.8 N.m |
| Mounting support | International standard flange |
| Motor flange size | 55 mm |
| Electrical connection | Straight connector |
| Torque constant | 0.58 N.m/A at 120 °C |
| Back emf constant | 40 V/krpm at 20 °C |
| Number of motor poles | 3.0 |
| Rotor inertia | 0.08 kg.cm² |
| Stator resistance | 41.8 Ohm |
| Stator inductance | 37.13 mH |
| Maximum radial force Fr | 340 N at 1000 rpm; 270 N at 2000 rpm; 240 N at 3000 rpm; 220 N at 4000 rpm; 200 N at 5000 rpm; 190 N at 6000 rpm; 180 N at 7000 rpm; 170 N at 8000 rpm |
| Maximum axial force Fa | 40 N |
| Type of cooling | Natural convection |
| Length | 159 mm |
| Centring collar diameter | 40 mm |
| Centring collar depth | 2 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 5.5 mm |
| Circle diameter of the mounting holes | 63 mm |
| Net weight | 1.3 kg |
| Sizing reference | SH30551P |
| Temperature copper hot | 130 °C |
| Output current 3s peak | 2.9 A |
| Inertia | 0.021 kg.cm² of brake; 0.059 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Logistical informations |
| Country of origin | DE |
| Main |
| Range compatibility | PacDrive 3 |
| Device short name | SH3 |
| Product or component type | Servo motor |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 10.922 cm |
| Package 1 Width | 19.050 cm |
| Package 1 Length | 39.116 cm |
| Package 1 Weight | 1.796 kg |
The SH30551P01F2000 is an AC servo motor of the SH3 series from Schneider Electric, specifically developed for motion-based automation systems within the PacDrive 3 platform. It features a compact design and high power density, achieved through optimized winding technology. The low rotor inertia enables high acceleration capability, making it particularly suitable for dynamic applications in industrial automation.
Applications
The servo motor is designed for applications requiring precise positioning and motion control, such as in machine building, packaging technology, or robotic drives. The integrated holding brake ensures safe positioning at standstill, which is advantageous in systems with high safety requirements. The IP65 protection rating for the motor housing and IP54 for the shaft bearing make the motor suitable for operating conditions with increased dust and moisture exposure, for example in production halls or outdoor environments.
Functions and Equipment in Detail
The motor features an absolute single-turn SinCos Hiperface encoder with a resolution of 128 periods per revolution, corresponding to a total resolution of 131,072 points per revolution. This high resolution enables precise feedback of position and speed. The brake provides a holding torque of 0.8 Nm to securely maintain position at standstill. The shaft end is designed as a smooth shaft with a diameter of 9 mm and a length of 20 mm, allowing for easy mechanical connection with drive components.
Technology Explained Simply
Electrical supply is via a 3-phase voltage ranging from 115 to 480 V. The rated power varies depending on voltage and reaches up to 440 W at 480 V, with a rated speed of up to 8000 rpm. The continuous standstill torque is 0.42 Nm, and the peak standstill torque is 1.5 Nm. Cooling is achieved through natural convection, enabling a maintenance-friendly operation. The motor is equipped with an international standard flange of size 55 mm, allowing universal mounting on various drive systems.
Compatibility and Accessories
The SH30551P01F2000 is intended for use with Lexium series servo amplifiers (Lexium 52 and Lexium 62). Electrical connection is made via two angled M23 connectors, arranged rotatably to allow flexible cable connection. Available accessories include encoder cables (e.g. VW3E2094R050, VW3E2094R150) and motor cables (e.g. VW3E1143R050), ensuring secure and reliable signal transmission.
Mounting and Installation
Mounting is done via the standard flange with a circular diameter of 63 mm and four mounting holes with a diameter of 5.5 mm. The fastening is simple and standardized, enabling quick integration into existing systems. The motor length is 159 mm, making it suitable for limited space conditions.
Operational Advantages
The motor offers high dynamics due to the low rotor inertia and precise positioning through the high-resolution encoder. The integrated holding brake ensures safe positioning at standstill. Natural cooling reduces maintenance effort, and the IP65 protection rating for the housing increases operational safety in demanding environments. Compatibility with Lexium drives enables flexible system integration.
Protection Rating and Operating Conditions
The IP65 protection rating for the motor housing protects against dust and splashing water, while the shaft bearing is rated IP54. The maximum copper temperature is 130 °C, defining the thermal load capacity of the motor under operating conditions. Maximum radial and axial forces are defined depending on speed, with the radial force being 340 N at 1000 rpm and decreasing to 170 N at 8000 rpm. The axial force is constant at 40 N.
Technical Specifications
The continuous power is 290 W, the torque constant is 0.58 Nm/A at 120 °C. The back-EMF constant is 40 V/krpm at 20 °C. The number of motor poles is 3, the rotor inertia is 0.08 kg.cm². The stator resistance is 41.8 Ohm, the stator inductance is 37.13 mH. The maximum mechanical speed is 9000 rpm. Electrical connection is via a rotatable right-angled connector.
Product Weight and Dimensions
The product weight is 1.3 kg. The motor length is 159 mm, the centering ring diameter is 40 mm, and the depth is 2 mm. The mounting holes have a diameter of 5.5 mm and are arranged on a circular diameter of 63 mm. The number of mounting holes is 4.
Compatibility with Drive Systems
The motor is designed for use with servo amplifiers Lexium 52 and Lexium 62. Connection is made via the M23 connectors, ensuring secure and reliable signal transmission. The combination with the corresponding drives enables precise and dynamic motion control.