| Complementary |
| Maximum mechanical speed | 9000 rpm |
| [Us] rated supply voltage | 115...480 V |
| Network number of phases | Three phase |
| Continuous stall current | 0.73 A |
| Continuous stall torque | 0.42 N.m at 115...480 V three phase |
| Continuous power | 290 W |
| Peak stall torque | 1.5 N.m at 115...480 V three phase |
| Nominal output power | 100 W at 115 V single phase; 210 W at 230 V single phase; 400 W at 400 V three phase; 440 W at 480 V three phase |
| Nominal torque | 0.5 N.m at 115 V single phase; 0.5 N.m at 230 V single phase; 0.35 N.m at 400 V three phase; 0.35 N.m at 480 V three phase |
| Nominal speed | 2000 rpm at 115 V single phase; 4000 rpm at 230 V single phase; 8000 rpm at 400 V three phase; 8000 rpm at 480 V three phase |
| Maximum current Irms | 2.9 A |
| Shaft end | Smooth shaft |
| Shaft diameter | 9 mm |
| Shaft length | 20 mm |
| IP degree of protection | IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5; IP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5 |
| Encoder type | Absolute single turn SinCos Hiperface |
| Speed feedback resolution | 128 periods |
| Holding brake | With |
| Holding torque | 0.8 N.m |
| Mounting support | International standard flange |
| Motor flange size | 55 mm |
| Electrical connection | Rotatable right angled connector |
| Torque constant | 0.58 N.m/A at 120 °C |
| Back emf constant | 40 V/krpm at 20 °C |
| Number of motor poles | 3.0 |
| Rotor inertia | 0.08 kg.cm² |
| Stator resistance | 41.8 Ohm |
| Stator inductance | 37.13 mH |
| Maximum radial force Fr | 340 N at 1000 rpm; 270 N at 2000 rpm; 240 N at 3000 rpm; 220 N at 4000 rpm; 200 N at 5000 rpm; 190 N at 6000 rpm; 180 N at 7000 rpm; 170 N at 8000 rpm |
| Maximum axial force Fa | 40 N |
| Type of cooling | Natural convection |
| Length | 159 mm |
| Centring collar diameter | 40 mm |
| Centring collar depth | 2 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 5.5 mm |
| Circle diameter of the mounting holes | 63 mm |
| Net weight | 1.3 kg |
| Sizing reference | SH30551P |
| Temperature copper hot | 130 °C |
| Number of motor stacks | 1 |
| Output current 3s peak | 2.9 A |
| Inertia | 0.021 kg.cm² of brake; 0.059 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Range compatibility | PacDrive 3 |
| Device short name | SH3 |
| Product or component type | Servo motor |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 11.5 cm |
| Package 1 Width | 19.0 cm |
| Package 1 Length | 39.5 cm |
| Package 1 Weight | 1.78 kg |
Lexium SH3 servo motor. This SH3 series of AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 0.5 Nm and achieves a peak torque of 1.5 Nm. Its nominal speed is up to 9000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 440 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. The motor flange is 55 mm for fastening. The drive shaft has a diameter of 9 mm. The shaft end is smooth and corresponds to protection class IP54. The motor housing corresponds to protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium series Lexium 52 & Lexium 62 are recommended for operating the synchronous motor.