Schneider Electric SH30551P01A2000, EAN: 3606485295039

Schneider Electric SH30551P01A2000 servo motor 0

Schneider Electric SH30551P01A2000 servo motor 0

Lieske Part No. 1767594
Mfg Part No SH30551P01A2000
EAN-Code 3606485295039
Manufacturer Schneider Electric
Here only 990,15 EUR
1.178,28 EUR incl. VAT

Further information for Schneider Electric SH30551P01A2000 servo motor 0

Complementary
Maximum mechanical speed9000 rpm
[Us] rated supply voltage115...480 V
Network number of phasesThree phase
Continuous stall current0.73 A
Continuous stall torque0.42 N.m at 115...480 V three phase
Continuous power290 W
Peak stall torque1.5 N.m at 115...480 V three phase
Nominal output power100 W at 115 V single phase; 210 W at 230 V single phase; 400 W at 400 V three phase; 440 W at 480 V three phase
Nominal torque0.5 N.m at 115 V single phase; 0.5 N.m at 230 V single phase; 0.35 N.m at 400 V three phase; 0.35 N.m at 480 V three phase
Nominal speed2000 rpm at 115 V single phase; 4000 rpm at 230 V single phase; 8000 rpm at 400 V three phase; 8000 rpm at 480 V three phase
Maximum current Irms2.9 A
Shaft endSmooth shaft
Shaft diameter9 mm
Shaft length20 mm
IP degree of protectionIP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5; IP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5
Encoder typeAbsolute single turn SinCos Hiperface
Speed feedback resolution128 periods
Holding brakeWithout
Mounting supportInternational standard flange
Motor flange size55 mm
Electrical connectionStraight connector
Torque constant0.58 N.m/A at 120 °C
Back emf constant40 V/krpm at 20 °C
Number of motor poles3.0
Rotor inertia0.059 kg.cm²
Stator resistance41.8 Ohm
Stator inductance37.13 mH
Maximum radial force Fr340 N at 1000 rpm; 270 N at 2000 rpm; 240 N at 3000 rpm; 220 N at 4000 rpm; 200 N at 5000 rpm; 190 N at 6000 rpm; 180 N at 7000 rpm; 170 N at 8000 rpm
Maximum axial force Fa40 N
Type of coolingNatural convection
Length132.5 mm
Centring collar diameter40 mm
Centring collar depth2 mm
Number of mounting holes4
Mounting holes diameter5.5 mm
Circle diameter of the mounting holes63 mm
Net weight1.2 kg
Sizing referenceSH30551P
Temperature copper hot130 °C
Output current 3s peak2.9 A
Inertia0.0 kg.cm² of brake; 0.059 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Logistical informations
Country of originDE
Main
Range compatibilityPacDrive 3
Device short nameSH3
Product or component typeServo motor
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height11.0 cm
Package 1 Width19.0 cm
Package 1 Length39.5 cm
Package 1 Weight1.607 kg
Unit Type of Package 2S04
Number of Units in Package 23
Package 2 Height30 cm
Package 2 Width40 cm
Package 2 Length60 cm
Package 2 Weight5.636 kg
Lexium SH3 servo motor. This SH3 series of AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 0.5 Nm and achieves a peak torque of 1.5 Nm. Its nominal speed is up to 9000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 440 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 55 mm for fastening. The drive shaft has a diameter of 9 mm. The shaft end is smooth and corresponds to protection class IP54. The motor housing has protection class IP65. There is no holding brake. The servo amplifiers from the Lexium series Lexium 52 & Lexium 62 are recommended for operating the synchronous motor.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1767594
qrcode für Schneider Electric SH30551P01A2000 servo motor 0