| Additional features |
| Max. mechanical speed | 9000 rpm |
| [UH,nom] Rated operating voltage | 115 - 480 V |
| Number of power phases | 3-phase supply |
| Standstill continuous current | 0,73 A |
| Continuous torque at standstill | 0.42 Nm at 115-480 V 3-phase supply |
| Continuous power | 290 W |
| Peak torque at standstill | 1.5 Nm at 115-480 V 3-phase supply |
| [Irms] maximum current | 2,9 A |
| Wave end | Plain shaft |
| Shaft diameter | 9 mm |
| Wavelength | 20 mm |
| Degree of protection (IP) | IP54 shaft bearing without shaft seal ring: corresponds to IEC 60034-5; IP65 motor: corresponds to IEC 60034-5; IP65 shaft bearing: corresponds to IEC 60034-5 |
| Encoder type | Absolute single-turn SinCos Hiperface |
| Speed feedback resolution | 128 cycles |
| Hold brake | None |
| Mounting bracket | International standard flange |
| Motor flange size | 55 mm |
| Electrical connection | Rotatable right angled connector |
| Torque constant | 0.58 Nm/A at 120 °C |
| Constant of back electromotive force | 40 V/krpm at 20 °C |
| Number of motor poles | 3,0 |
| Rotor inertia | 0,059 kg.cm² |
| Stator resistance | 41.8 Ohm |
| Stator inductance | 37,13 mH |
| Max. radial force (FR) | 340 N at 1000 rpm; 270 N at 2000 rpm; 240 N at 3000 rpm; 220 N at 4000 rpm; 200 N at 5000 rpm; 190 N at 6000 rpm; 180 N at 7000 rpm; 170 N at 8000 rpm |
| Max. axial force (FA) | 40 N |
| Cooling type | Natural convection |
| Length | 132,5 mm |
| Diameter of centring ring | 40 mm |
| Depth of centring ring | 2 mm |
| Number of mounting holes | 4 |
| Diameter of mounting holes | 5,5 mm |
| Mounting hole circle diameter | 63 mm |
| Product weight | 1,2 kg |
| Rated reference | SH30551P |
| Copper temperature hot | 130 °C |
| Output current 3s peak | 2,9 A |
| Inertia | 0.0 kg.cm² of brake; 0.059 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main features |
| Compatible product family | PacDrive 3 |
| Device short name | SH3 |
| Product or component type | Servomotor |
| Packaging units |
| VPE 1 type | PCE |
| Number of devices per package | 1 |
| VPE 1 height | 11,500 cm |
| VPE 1 width | 39,800 cm |
| VPE 1 length | 19,400 cm |
| Packaging weight (Lbs) | 1,402 kg |
Lexium SH3 servo motor. This SH3 series of AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 0.5 Nm and achieves a peak torque of 1.5 Nm. Its nominal speed is up to 9000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 440 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. The motor flange is 55 mm for fastening. The drive shaft has a diameter of 9 mm. The shaft end is smooth and corresponds to protection class IP54. The motor housing corresponds to protection class IP65. There is no holding brake. The servo amplifiers from the Lexium series Lexium 52 & Lexium 62 are recommended for operating the synchronous motor.