Schneider Electric SH30402P06F2000, EAN: 3606485467641

Schneider Electric SH30402P06F2000 servomotor 40 mm

Industrial Material > Enclosures / Chassis > System Accessories

Schneider Electric SH30402P06F2000 servomotor 40 mm

Lieske Part No. 1859427
Mfg Part No SH30402P06F2000
EAN-Code 3606485467641
Manufacturer Schneider Electric
Here only 1.161,42 EUR
1.382,09 EUR incl. VAT

Further information for Schneider Electric SH30402P06F2000 servomotor 40 mm

Complementary
Maximum mechanical speed9000 rpm
[Us] rated supply voltage115...480 V
Network number of phasesThree phase
Continuous stall current1.5 A
Continuous stall torque0.39 N.m at 115...480 V three phase
Continuous power290 W
Peak stall torque1.5 N.m at 480 V three phase
Nominal output power152 W at 115 V single phase; 152 W at 230 V single phase; 275 W at 400 V three phase; 289 W at 480 V three phase
Nominal torque0.292 N.m at 115 V single phase; 0.292 N.m at 230 V single phase; 0.31 N.m at 400 V three phase; 0.31 N.m at 480 V three phase
Nominal speed4000 rpm at 115 V single phase; 4000 rpm at 230 V single phase; 9000 rpm at 400 V three phase; 9000 rpm at 480 V three phase
Maximum current Irms7.2 A
Shaft endSmooth shaft
Shaft diameter8 mm
Shaft length25 mm
IP degree of protectionIP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5; IP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5
Encoder typeAbsolute single turn SinCos Hiperface
Speed feedback resolution16 periods
Holding brakeWith
Holding torque0.4 N.m
Mounting supportInternational standard flange
Motor flange size40 mm
Electrical connectionRotatable right angled connector
Torque constant0.26 N.m/A at 120 °C
Back emf constant18 V/krpm at 20 °C
Number of motor poles5.0
Rotor inertia0.0588 kg.cm²
Stator resistance11.6 Ohm
Stator inductance6.4 mH
Type of coolingNatural convection
Length119.4 mm
Centring collar diameter30 mm
Centring collar depth2.5 mm
Number of mounting holes4
Mounting holes diameter4.5 mm
Circle diameter of the mounting holes46 mm
Net weight0.8 kg
Sizing referenceSH30402P
Temperature copper hot120 °C
Output current 3s peak7.2 A
Inertia0.017 kg.cm² of brake; 0.042 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Main
Range compatibilityPacDrive 3
Device short nameSH3
Product or component typeServo motor
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height10.800 cm
Package 1 Width24.700 cm
Package 1 Length16.900 cm
Package 1 Weight996.000 g
Lexium SH3 servo motor. This SH3 series of AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 0.39 Nm and achieves a peak torque of 1.50 Nm. Its nominal speed is up to 9000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 292 W. The built-in encoder is designed as a single-turn with 16 periods/revolution (16x1024) as SinCos Hiperface. The electrical connection is made via 2x Y-TEC connectors, angled by 90° and rotatable. The motor flange is 40 mm for fastening. The drive shaft has a diameter of 8 mm. The shaft end is smooth and corresponds to protection class IP54. The motor housing has protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium series Lexium 52 & Lexium 62 are recommended for operating the synchronous motor.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1859427
qrcode für Schneider Electric SH30402P06F2000 servomotor 40 mm