| Complementary |
| Maximum mechanical speed | 9000 rpm |
| [Us] rated supply voltage | 115...480 V |
| Network number of phases | Three phase |
| Continuous stall current | 1.5 A |
| Continuous stall torque | 0.39 N.m at 115...480 V three phase |
| Continuous power | 290 W |
| Peak stall torque | 1.5 N.m at 480 V three phase |
| Nominal output power | 152 W at 115 V single phase; 152 W at 230 V single phase; 275 W at 400 V three phase; 289 W at 480 V three phase |
| Nominal torque | 0.292 N.m at 115 V single phase; 0.292 N.m at 230 V single phase; 0.31 N.m at 400 V three phase; 0.31 N.m at 480 V three phase |
| Nominal speed | 4000 rpm at 115 V single phase; 4000 rpm at 230 V single phase; 9000 rpm at 400 V three phase; 9000 rpm at 480 V three phase |
| Maximum current Irms | 7.2 A |
| Shaft end | Smooth shaft |
| Shaft diameter | 8 mm |
| Shaft length | 25 mm |
| IP degree of protection | IP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5 |
| Encoder type | Absolute single turn SinCos Hiperface |
| Speed feedback resolution | 16 periods |
| Holding brake | Without |
| Mounting support | International standard flange |
| Motor flange size | 40 mm |
| Electrical connection | Straight connector |
| Torque constant | 0.26 N.m/A at 120 °C |
| Back emf constant | 18 V/krpm at 20 °C |
| Number of motor poles | 5.0 |
| Rotor inertia | 0.0419 kg.cm² |
| Stator resistance | 11.6 Ohm |
| Stator inductance | 6.4 mH |
| Type of cooling | Natural convection |
| Length | 93.4 mm |
| Centring collar diameter | 30 mm |
| Centring collar depth | 2.5 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 4.5 mm |
| Circle diameter of the mounting holes | 46 mm |
| Net weight | 0.6 kg |
| Sizing reference | SH30402P |
| Temperature copper hot | 120 °C |
| Number of motor stacks | 2 |
| Output current 3s peak | 7.2 A |
| Inertia | 0.0 kg.cm² of brake; 0.042 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Logistical informations |
| Country of origin | DE |
| Main |
| Range compatibility | PacDrive 3 |
| Device short name | SH3 |
| Product or component type | Servo motor |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 11.000 cm |
| Package 1 Width | 24.000 cm |
| Package 1 Length | 17.000 cm |
| Package 1 Weight | 627.000 g |
Lexium SH3 servo motor. This SH3 series of AC servo motors has a low rotor moment of inertia, which enables high acceleration capability for dynamic applications. Thanks to the winding technology, a higher power density is achieved in a compact design. This servo has a nominal continuous stall torque of 0.39 Nm and achieves a peak torque of 1.50 Nm. Its nominal speed is up to 9000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 292 W. The built-in encoder is designed as a single-turn with 16 periods/revolution (16x1024) as SinCos Hiperface. The electrical connection is made via 2x Y-TEC connectors, angled by 90° and rotatable. The motor flange is 40 mm for fastening. The drive shaft has a diameter of 8 mm. The shaft end is smooth and corresponds to protection class IP65. The motor housing has protection class IP65. There is no holding brake. The servo amplifiers from the Lexium series Lexium 52 & Lexium 62 are recommended for operating the synchronous motor.