| Complementary |
| Format of the drive | Block |
| Network number of phases | Single phase |
| [Us] rated supply voltage | 100...120 V - 15...10 %; 200...230 V - 15...10 % |
| Supply voltage type | AC/DC |
| Network frequency limits | 50…60 Hz (- 15...10 %) |
| Communication interface | Profibus DP fieldbus, integrated |
| Maximum motor phase current | 6.8 A |
| Current consumption | 5 A 230 V main supply; 7 A 115 V main supply; |
| Nominal power | 280 W at 115 V; 420 W at 230 V |
| Short-circuit current | 0.5 kA |
| Associated fuse rating | 10 A at 115 V; 6 A at 230 V |
| Overvoltage category | III |
| Inrush current | 60 A |
| Maximum leakage current | 30 mA |
| Voltage state 0 guaranteed | -3...5 V for 24 V input signals |
| Voltage state 1 guaranteed | 15...30 V for 24 V input signals |
| Input current | 10 mA for 24 V input signals |
| Maximum input frequency | 200 kHz for signal input ENC_A, ENC_B, ENC_I - control type pulse/direction; 400 kHz for signal input ENC_A, ENC_B, ENC_I - control type A/B |
| Maximum output frequency | 400 kHz for pulse/direction interface A/B; 200 kHz for pulse/direction interface pulse/direction |
| Maximum switching current | 50 mA (24 V output signals) |
| Physical interface | RS422 - pulse/direction interface; RS422 - signal input ENC_A, ENC_B, ENC_I |
| Input voltage | 24 V -15 %/+20 % for 24 V control voltage |
| Residual ripple | < 5 % (24 V control voltage) |
| Resistance | 5 kOhm (pulse/direction interface) |
| Safety function | Safe torque off safety function for machine conforming to IEC/EN 61800-5-2; Safe torque off safety function for machine conforming to ISO 13849-1 level d; Safe torque off safety function for system process conforming to EN/IEC 61508 level SIL2; Safe torque off safety function for system process conforming to IEC/EN 61800-5-2 |
| Type of cooling | Fan |
| Maximum mechanical speed | 3000 rpm |
| Height | 145 mm |
| Width | 72 mm |
| Depth | 140 mm |
| Shock resistance | 15 gn for 11 ms conforming to IEC 60068-2-27 |
| Net weight | 1.2 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Electromagnetic compatibility | Electrostatic discharge level 3 conforming to IEC 61000-4-2; Immunity to electrical transients level 4 conforming to IEC 61000-4-4; Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3; Voltage/current impulse level 3 conforming to IEC 61000-4-5 |
| Standards | EN/IEC 61800-3; EN/IEC 61800-5-1 |
| Product certifications | UL; cUL; TÜV |
| Marking | CE |
| Ambient air temperature for operation | 0…50 °C |
| Ambient air temperature for storage | -25…70 °C |
| Pollution degree | Level 2 |
| Relative humidity | 5…85 % without condensation |
| Operating altitude | 1000...< 2000 m without derating (maximum ambient temperature 40°C, no protective film, lateral distance of > 50mm) |
| Vibration resistance | 1 gn (f= 13…150 Hz) conforming to IEC 60068-2-6; 1.5 mm (f= 3…13 Hz) conforming to IEC 60068-2-6 |
| IP degree of protection | IP20; On upper part: IP40 (without removal of protective film) |
| Main |
| Range of product | Lexium SD3 |
| Product or component type | Motion stepper drive |
| Device short name | SD328 |
| Supply voltage limits | 200…240 V; 100…120 V |
| Bus type | Fieldbus |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 16.500 cm |
| Package 1 Width | 17.500 cm |
| Package 1 Length | 18.800 cm |
| Package 1 Weight | 1.324 kg |
| Unit Type of Package 2 | S04 |
| Number of Units in Package 2 | 4 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 40.000 cm |
| Package 2 Length | 60.000 cm |
| Package 2 Weight | 5.300 kg |
| Unit Type of Package 3 | P12 |
| Number of Units in Package 3 | 16 |
| Package 3 Height | 45.000 cm |
| Package 3 Width | 80.000 cm |
| Package 3 Length | 120.000 cm |
| Package 3 Weight | 21.500 kg |
Schrittmotorverstärker der Reihe Lexium SD328. Der SD328 ist ein universell einsetzbarer Schrittmotorverstärker. In Kombination mit ausgewählten 3phasigen Schrittmotoren entsteht ein sehr kompaktes und leistungsfähiges Antriebssystem. Sollwerte werden typischerweise von einer übergeordneten SPS oder einem Motion Controller vorgegeben und überwacht. Dieser Verstärker verfügt über eine Profibus DP-Busansteuerung. Der Spitzenstrom beträgt bis zu 6,8 A. Die Versorgungsspannung ist umschaltbar zwischen 115/230 VAC und ein EMV-Filter ist integriert. STO als Sicherheitsfunktion steht zur Verfügung.