| Complementary |
| Format of the drive | Block |
| Network number of phases | Single phase |
| [Us] rated supply voltage | 24...48 V - 15...10 % |
| Supply voltage type | DC |
| Communication interface | Pulse/direction, integrated |
| Maximum motor phase current | 10 A |
| Associated fuse rating | 10 A |
| Overvoltage category | III |
| Maximum leakage current | 30 mA |
| Voltage state 1 guaranteed | 15...30 V for 24 V optocoupler input signals; 2.5...5.25 V for 5 V optocoupler input signals |
| Input current | 25 mA for 5 V optocoupler input signals; 7 mA for 24 V optocoupler input signals |
| Maximum input frequency | 200 kHz for 24 V optocoupler input signals; 200 kHz for 5 V optocoupler input signals |
| Maximum switching voltage | 30 V DC (readiness signal output); 30 V (pulse/direction output signal); 10 V DC (output signal) |
| Maximum switching current | 200 mA (readiness signal output); 50 mA (pulse/direction output signal); 20 mA (output signal) |
| Physical interface | RS422 - pulse/direction interface with oscillator |
| Input voltage | < 30 V |
| Residual ripple | < 5 % (24 V control voltage) |
| Resistance | 10 kOhm (external potentiometer) |
| Analogue input type | Voltage 0...10 V, resolution: 10 bits, impedance: 50 kOhm |
| Local signalling | 1 LED - ERR; 1 LED - RUN |
| Type of cooling | Natural convection |
| Height | 117 mm |
| Width | 74.5 mm |
| Depth | 23.5 mm |
| Shock resistance | 15 gn for 11 ms conforming to IEC 60068-2-27 |
| Net weight | 0.25 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Electromagnetic compatibility | Electrostatic discharge level 3 conforming to IEC 61000-4-2; Immunity to electrical transients level 4 conforming to IEC 61000-4-4; Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3; Voltage/current impulse level 3 conforming to IEC 61000-4-5 |
| Standards | IEC 61800-3 environment 1; IEC 61800-3; IEC 50178; IEC 61800-5-1; EN/IEC 61800-3 environment 2 |
| Product certifications | UL; cUL |
| Marking | CE |
| Ambient air temperature for operation | 0…50 °C |
| Ambient air temperature for storage | -25…70 °C |
| Pollution degree | Level 2 |
| Relative humidity | 5…85 % without condensation |
| Operating altitude | 1000...< 2000 m without derating (maximum ambient temperature 40°C, lateral distance of > 20 mm) |
| Vibration resistance | 1 gn (f= 13…150 Hz) conforming to IEC 60068-2-6; 1.5 mm (f= 3…13 Hz) conforming to IEC 60068-2-6 |
| IP degree of protection | IP20 |
| Logistical informations |
| Country of origin | DE |
| Main |
| Range of product | Lexium SD3 |
| Product or component type | Motion stepper drive |
| Device short name | SD315 |
| Supply voltage limits | 19…60 V |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 6.800 cm |
| Package 1 Width | 12.800 cm |
| Package 1 Length | 19.000 cm |
| Package 1 Weight | 371.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 12 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 4.872 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 96 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 80.000 cm |
| Package 3 Length | 60.000 cm |
| Package 3 Weight | 50.976 kg |
Schrittmotorverstärker der Reihe Lexium SD315. Der SD315 ist ein universell einsetzbarer Schrittmotorverstärker. In Kombination mit ausgewählten 3phasigen Schrittmotoren entsteht ein sehr kompaktes und leistungsfähiges Antriebssystem. Sollwerte werden typischerweise von einer übergeordneten SPS oder einem Motion Controller vorgegeben und überwacht. Dieser Verstärker verfügt über eine Puls/Richtungsschnittstelle mit die Betriebsart Oszillator. Der Spitzenstrom beträgt bis zu 10 A. Die Versorgungsspannung umfaßt den Bereich 24-48 VDC.