| Complementary |
| Format of the drive | Block |
| Network number of phases | Single phase |
| [Us] rated supply voltage | 24...48 V - 15...10 % |
| Supply voltage type | DC |
| Communication interface | Pulse/direction, integrated |
| Maximum motor phase current | 10 A |
| Associated fuse rating | 10 A |
| Overvoltage category | III |
| Maximum leakage current | 30 mA |
| Voltage state 1 guaranteed | 15...30 V for 24 V optocoupler input signals; 2.5...5.25 V for 5 V optocoupler input signals |
| Input current | 25 mA for 5 V optocoupler input signals; 7 mA for 24 V optocoupler input signals |
| Maximum input frequency | 200 kHz for 24 V optocoupler input signals; 200 kHz for 5 V optocoupler input signals |
| Maximum switching voltage | 30 V DC (readiness signal output) |
| Maximum switching current | 200 mA (readiness signal output) |
| Physical interface | RS422 - pulse/direction interface without oscillator |
| Residual ripple | < 5 % (24 V control voltage) |
| Local signalling | 1 LED - ERR; 1 LED - RUN |
| Type of cooling | Natural convection |
| Height | 117 mm |
| Width | 74.5 mm |
| Depth | 23.5 mm |
| Shock resistance | 15 gn for 11 ms conforming to IEC 60068-2-27 |
| Net weight | 0.25 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Electromagnetic compatibility | Electrostatic discharge level 3 conforming to IEC 61000-4-2; Immunity to electrical transients level 4 conforming to IEC 61000-4-4; Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3; Voltage/current impulse level 3 conforming to IEC 61000-4-5 |
| Standards | IEC 61800-3 environment 1; IEC 50178; IEC 61800-5-1; EN/IEC 61800-3 environment 2; IEC 61800-3 |
| Product certifications | cUL; UL |
| Marking | CE |
| Ambient air temperature for operation | 0…50 °C |
| Ambient air temperature for storage | -25…70 °C |
| Pollution degree | Level 2 |
| Relative humidity | 5…85 % without condensation |
| Operating altitude | 1000...< 2000 m without derating (maximum ambient temperature 40°C, lateral distance of > 20 mm) |
| Vibration resistance | 1 gn (f= 13…150 Hz) conforming to IEC 60068-2-6; 1.5 mm (f= 3…13 Hz) conforming to IEC 60068-2-6 |
| IP degree of protection | IP20 |
| Logistical informations |
| Country of origin | DE |
| Main |
| Range of product | Lexium SD3 |
| Product or component type | Motion stepper drive |
| Device short name | SD315 |
| Supply voltage limits | 19…60 V |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 6.600 cm |
| Package 1 Width | 12.800 cm |
| Package 1 Length | 18.800 cm |
| Package 1 Weight | 322.900 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 8 |
| Package 2 Height | 15 cm |
| Package 2 Width | 30 cm |
| Package 2 Length | 40 cm |
| Package 2 Weight | 2.833 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 128 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 80.000 cm |
| Package 3 Length | 60.000 cm |
| Package 3 Weight | 53.331 kg |
Stepper motor amplifier from the Lexium SD315 series. The SD315 is a universally applicable stepper motor amplifier. In combination with selected 3-phase stepper motors, a very compact and powerful drive system is created. Setpoints are typically specified and monitored by a higher-level PLC or motion controller. This amplifier has a pulse/direction interface without the oscillator operating mode. The peak current is up to 10 A. The supply voltage covers the range 24-48 VDC.