| Complementary |
| Network number of phases | Single phase |
| [Us] rated supply voltage | 24...48 V |
| Supply voltage type | DC |
| Supply voltage limits | 12…48 V |
| Maximum motor phase current | 5 A |
| Input current | 10 µA - high level for SPI interfaces; -10 µA - low level for SPI interfaces |
| Output current | 14.6 mA for step clock; 8 mA - high level for SPI interfaces; -7 mA - low level for SPI interfaces |
| Output voltage | 2.1 V high level (SPI interfaces); 0.5 V low level (SPI interfaces); 5...24 V high level (isolated inputs: step clock, direction, enable); 8.7 V low level (isolated inputs: step clock, direction, enable) |
| Input voltage | 2 V - high level for SPI interfaces signal inputs; 1.2 V - low level for SPI interfaces signal inputs |
| Residual ripple | 2 V at nominal voltage |
| Electrical connection | 1 connector wire crimp 4 pins for motor interface; 1 connector wire crimp 12 pins for multifunction and communication interface; 1 connector wire crimp 2 pins for supply voltage; 1 connector |
| Type of cooling | Convection |
| Width | 76 mm |
| Height | 54 mm |
| Depth | 99 mm |
| Marking | CE |
| Net weight | 0.34 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Electromagnetic compatibility | Electrostatic discharge conforming to IEC 61000-4-2; Immunity to radiated radio-electrical interference conforming to IEC 61000-4-3; Immunity to electrical transients conforming to IEC 61000-4-4; Voltage/current impulse conforming to IEC 61000-4-5; Immunity to voltage dips conforming to IEC 61000-4-11; Immunity to conducted RF disturbances conforming to IEC 61000-4-6 |
| Standards | EN 55011 group 1 class A; EN 61000-3-3; IEC 61000-3-2 |
| Ambient air temperature for operation | 0…50 °C without derating with flange motor mounted on a steel plate 300 x 300 x 10 mm; 50…65 °C with power derating of 2.2 % per °C with flange motor mounted on a steel plate 300 x 300 x 10 mm |
| Ambient air temperature for storage | -25…70 °C |
| Relative humidity | 15…85 % without condensation |
| IP degree of protection | IP20 |
| Logistical informations |
| Country of origin | US |
| Main |
| Range of product | Lexium SD2 |
| Product or component type | Motion stepper drive |
| Device short name | SD215 |
| Communication interface | Pulse/direction |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 9 cm |
| Package 1 Width | 13.4 cm |
| Package 1 Length | 19.7 cm |
| Package 1 Weight | 478 g |