| Complementary |
| [Uimp] rated impulse withstand voltage | 2.5 kV during 1.2/50 µs |
| [Ie] rated operational current | 3 A at 28 V (DC) NC conforming to IEC; 3 A at 250 V (AC) NC conforming to IEC; 6 A at 28 V (DC) NO conforming to IEC; 6 A at 250 V (AC) NO conforming to IEC; 6 A at 277 V (AC) conforming to UL; 8 A at 30 V (DC) conforming to UL |
| minimum switching current | 10 mA |
| Minimum switching voltage | 17 V |
| Minimum switching capacity | 170 mW at 10 mA, 17 V |
| Electrical durability | 100000 cycles for resistive load |
| Rated operational voltage limits | 19.2...26.4 V AC |
| [Ui] rated insulation voltage | 250 V conforming to IEC |
| Maximum switching voltage | 250 V |
| Drop-out voltage threshold | >= 0.3 Uc AC |
| Load current | 6 A at 250 V AC; 6 A at 28 V DC |
| Operating time | 20 ms |
| Maximum switching capacity | 1500 VA/168 W AC/DC |
| Average resistance | 180 Ohm at 20 °C +/- 10 % |
| Average coil consumption | 1.2 W, AC |
| Mechanical durability | 10000000 cycles |
| Safety reliability data | B10d = 100000 |
| Utilisation coefficient | 20 % |
| CAD overall width | 26.9 mm |
| CAD overall height | 79 mm |
| CAD overall depth | 78.45 mm |
| torque value | 1 N.m |
| Reset time | 20 ms |
| Contact terminal arrangement | Mixed |
| Connections - terminals | Connector, 1 x 0.25...1 x 2.5 mm² (22 AWG...14 AWG) flexible with cable end; Connector, 2 x 0.25...2 x 1 mm² (22 AWG...17 AWG) flexible with cable end; Connector, 1 x 0.5...1 x 2.5 mm² (20 AWG...14 AWG) solid without cable end; Connector, 2 x 0.5...2 x 1.5 mm² (20 AWG...16 AWG) solid without cable end |
| Dielectric strength | 1300 V AC between contacts with micro disconnection; 2000 V AC between coil and contact with basic insulation; 2000 V AC between poles with basic insulation |
| Compatibility code | RXM |
| Protection category | RT I |
| Pollution degree | 2 |
| Operating position | Any position |
| Test levels | Level A group mounting |
| Device presentation | Complete product |
| Sale per indivisible quantity | 30 |
| Contacts material | AgNi |
| Shape of pin | Flat (faston type) |
| Net weight | 0.096 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Ambient air temperature for operation | -40…55 °C |
| IP degree of protection | IP20 conforming to IEC 60529 |
| Standards | UL 508; IEC 61810-1; CSA C22.2 No 14; IEC 61984 |
| Product certifications | UL; Lloyd's; CE; CSA; GOST; IECEE CB Scheme |
| Ambient air temperature for storage | -40…85 °C |
| Vibration resistance | 3 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles in operation; 5 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles not operating |
| Shock resistance | 10 gn for in operation; 30 gn for not operating |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range of product | Harmony Electromechanical Relays |
| Series name | RXM series |
| Product or component type | Pre-assembled plug-in relay with socket |
| Relay type | Miniature relay |
| Contacts type and composition | 4 C/O |
| status LED | Without |
| Control type | Lockable test button |
| [Uc] control circuit voltage | 24 V AC 50/60 Hz |
| [Ithe] conventional enclosed thermal current | 6 A |
| Continuous output current | 5 A |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 2.800 cm |
| Package 1 Width | 8.000 cm |
| Package 1 Length | 8.000 cm |
| Package 1 Weight | 95.000 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 30 |
| Package 2 Height | 10.000 cm |
| Package 2 Width | 25.500 cm |
| Package 2 Length | 30.000 cm |
| Package 2 Weight | 3.183 kg |
| Unit Type of Package 3 | S03 |
| Number of Units in Package 3 | 60 |
| Package 3 Height | 30 cm |
| Package 3 Width | 30 cm |
| Package 3 Length | 40 cm |
| Package 3 Weight | 7.134 kg |
Harmony Relay. Pre-assembled and ready-to-use miniature relay RXM consisting of relay, base, retaining bracket and label. Number of contacts - 4, design - relay changeover, contact load capacity - 6 A each. Coil control voltage - 24 VAC. Mechanical position indicator - yes, LED indicator - no. Test button for testing the contacts - yes, test lever for permanent switching for test purposes - yes, operation - tool-free. Plug-in base with screw terminals in a combined arrangement for mounting on a top hat rail or screwable onto a mounting plate. Plastic retaining bracket for fixing and easy removal of the relay. Label for identification. All components are assembled and ready for use and the pre-assembled relay can be used immediately.