| Complementary |
| [Uimp] rated impulse withstand voltage | 4 kV during 1.2/50 µs |
| [Ie] rated operational current | 6 A at 28 V (DC) NC conforming to IEC; 6 A at 250 V (AC) NC conforming to IEC; 12 A at 28 V (DC) NO conforming to IEC; 12 A at 250 V (AC) NO conforming to IEC |
| minimum switching current | 10 mA |
| Minimum switching voltage | 17 V |
| Minimum switching capacity | 170 mW at 10 mA, 17 V |
| Electrical durability | 100000 cycles for resistive load |
| Rated operational voltage limits | 19.2...26.4 V DC |
| [Ui] rated insulation voltage | 250 V conforming to IEC |
| Maximum switching voltage | 250 V |
| Drop-out voltage threshold | >= 0.1 Uc DC |
| Load current | 12 A at 250 V AC; 12 A at 28 V DC |
| Operating time | 20 ms |
| Maximum switching capacity | 3000 VA AC; 336 W DC |
| Average resistance | 650 Ohm at 20 °C +/- 10 % |
| Average coil consumption | 0.9 W, DC |
| Mechanical durability | 10000000 cycles |
| Safety reliability data | B10d = 100000 |
| Utilisation coefficient | 20 % |
| CAD overall width | 26.9 mm |
| CAD overall height | 82.8 mm |
| CAD overall depth | 80.35 mm |
| torque value | 1 N.m |
| Reset time | 20 ms |
| Contact terminal arrangement | Separate |
| Connections - terminals | Connector, 1 x 0.25...1 x 2.5 mm² (22 AWG...14 AWG) flexible with cable end; Connector, 2 x 0.25...2 x 1 mm² (22 AWG...17 AWG) flexible with cable end; Connector, 1 x 0.5...1 x 2.5 mm² (20 AWG...14 AWG) solid without cable end; Connector, 2 x 0.5...2 x 1.5 mm² (20 AWG...16 AWG) solid without cable end |
| Dielectric strength | 1300 V AC between contacts with micro disconnection; 2000 V AC between coil and contact with basic insulation; 2000 V AC between poles with basic insulation |
| Compatibility code | RXM |
| Protection category | RT I |
| Pollution degree | 2 |
| Operating position | Any position |
| Test levels | Level A group mounting |
| Device presentation | Complete product |
| Sale per indivisible quantity | 30 |
| Contacts material | AgNi |
| Shape of pin | Flat (faston type) |
| Net weight | 0.096 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Ambient air temperature for operation | -40…55 °C |
| IP degree of protection | IP20 conforming to IEC 60529 |
| Standards | UL 508; IEC 61810-1; CSA C22.2 No 14; IEC 61984 |
| Product certifications | UL; Lloyd's; CE; CSA; GOST; IECEE CB Scheme |
| Ambient air temperature for storage | -40…85 °C |
| Vibration resistance | 3 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles in operation; 5 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles not operating |
| Shock resistance | 10 gn for in operation; 30 gn for not operating |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range of product | Harmony Electromechanical Relays |
| Series name | RXM series |
| Product or component type | Pre-assembled plug-in relay with socket |
| Relay type | Miniature relay |
| Contacts type and composition | 2 C/O |
| status LED | With |
| Control type | Lockable test button |
| [Uc] control circuit voltage | 24 V DC |
| [Ithe] conventional enclosed thermal current | 12 A |
| Continuous output current | 10 A |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 8.500 cm |
| Package 1 Width | 2.700 cm |
| Package 1 Length | 8.300 cm |
| Package 1 Weight | 89.000 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 30 |
| Package 2 Height | 10.000 cm |
| Package 2 Width | 26.300 cm |
| Package 2 Length | 29.900 cm |
| Package 2 Weight | 3.020 kg |
| Unit Type of Package 3 | S03 |
| Number of Units in Package 3 | 60 |
| Package 3 Height | 30 cm |
| Package 3 Width | 30 cm |
| Package 3 Length | 40 cm |
| Package 3 Weight | 6.780 kg |
Harmony Relay. Pre-assembled and ready-to-use miniature relay RXM consisting of relay, base, retaining bracket and label. Number of contacts - 2, design - relay changeover contact, contact load capacity - 12 A each. Coil control voltage - 24 VDC. Mechanical position indicator - yes, LED display - yes. Test button for testing the contacts - yes, test lever for permanent switching for test purposes - yes, operation - tool-free. Plug-in base with screw terminals in separate arrangement for mounting on top hat rail or screwable onto mounting plate. Plastic retaining bracket for fixing and easy removal of the relay. Label for identification. All components are assembled and ready for use and the pre-assembled relay can be used immediately.