| Additional features |
| LED status indicator | With |
| Electrical lifetime | 100000 cycles resistive load for normally closed contact (NC) at 55 °C; 100000 cycles resistive load for normally open contact (NO) at 55 °C |
| [Ui] Rated insulation voltage | 250 V corresponds to IEC; 300 V corresponds to CSA; 300 V corresponds to UL |
| Removable legend | With |
| Max. switching voltage | 250 V AC; 30 V DC |
| Failure voltage threshold | >= 0,1 Uc DC |
| [Ie] Rated operational current | 10 A at 30 V (DC) complies with UL; 10 A at 30 V (DC) complies with IEC; 10 A at 250 V (AC) complies with UL; 10 A at 250 V (AC) complies with IEC |
| Load current | 5 A at 250 V AC |
| Minimum switching power | 50 mW at 10 mA, 5 V DC |
| Max. switching power | 1.250 VA |
| Control type | Without lockable test button |
| Torque | 0,8 Nm |
| Average resistance | 1100 Ohm at 23 °C ± 10 % |
| Contact resistance | 100 MOhm |
| Insulation resistance | 1,000 MOhm at 500 V DC |
| Electrical insulation class | Class F |
| Mechanical life | 10000000 cycles |
| Safety and reliability data | B10d = 100.000 |
| Utilisation factor | 20 % |
| Operating time | 20 ms |
| Reset time | 20 ms |
| Arrangement of terminal blocks | Separate |
| Connections - terminals | Push-in terminal, 1 x 0.5 - 1.5 mm² (AWG 20 - AWG 16) flexible with cable end; Push-in terminal, 1 x 0.5 - 1.5 mm² (AWG 20 - AWG 16) solid without cable end |
| Dielectric strength | 1000 V AC between contacts with micro-breaking; 5000 V AC between coil and contact with reinforced insulation; 3000 V AC between poles with basic insulation |
| [Uimp] Rated impulse voltage withstand | 1200 V AC between contacts with micro-break; 6000 V between coil and contact with reinforced insulation; 1500 V between terminals and housing with basic insulation |
| Over voltage category | III |
| Protection category | RT I |
| Pollution degree | 2 |
| Test classes | Level A group mounting |
| Device representation | Complete product |
| Contact material | Silver alloy (AgSnO2In2O3) |
| Pin shape | Flat (Type Faston) |
| Product weight | 62 g |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main features |
| Product series | Harmony Electromechanical Relays |
| Series name | RXG Series |
| Product or component type | Pre-assembled plug relay |
| Device type | interface relay |
| Contact type and composition | 2 changeover contacts |
| [Uc] control circuit voltage | 24 V DC |
| [Ithe] conventional enclosed thermal current | 5 A at -40…55 °C |
| Local signalling | Identification bit |
| Mounting |
| Standards | IEC 61810-1; CSA C22.2 No. 14; UL 508; IEC 61984 |
| Product certifications | CSA; CE; UL; EAC; DNV |
| Ambient temperature during storage | -40…85 °C |
| Operating ambient temperature | -40…70 °C |
| Degree of protection (IP) | IP40 |
| Relative humidity | 10…85 % |
| Vibration resistance | 3 Gn, amplitude = ± 0.75 mm (f = 10…150 Hz) in operation; 5 gn, amplitude = ± 0.75 mm (f = 10…150 Hz) not in operation |
| Packaging units |
| VPE 1 type | PCE |
| Number of devices per package | 1 |
| VPE 1 height | 1,600 cm |
| VPE 1 width | 6,700 cm |
| VPE 1 length | 10,200 cm |
| Packaging weight (Lbs) | 60,000 g |
| VPE 2 type | BB1 |
| VPE 2 quantity | 10 |
| VPE 2 height | 7,400 cm |
| VPE 2 width | 10,600 cm |
| VPE 2 length | 16,500 cm |
| VPE 2 weight | 646,000 g |
| VPE 3 type | S03 |
| VPE 3 quantity | 160 |
| VPE 3 height | 30,000 cm |
| VPE 3 width | 30,000 cm |
| VPE 3 length | 40,000 cm |
| VPE 3 weight | 10,888 kg |
Dieses Interface-Steckrelais gehört zur Produktreihe der elektromechanischen Relais Harmony RXG. Es handelt sich um ein bereits vormontiertes Relais, welches auf einer separaten Kontakt-Steckklemme auf dem Sockel montiert ist. Das mechanische Interface-Relais für 5A, 24V DC und 2 Wechsler ist direkt einsatzbereit und spart dadurch Zeit bei der Auswahl und Montage. Montiert auf einer Hutschiene erfolgt der Anschluss dabei über Push-In Klemmen. Zudem verfügt das vormontierte Relais über eine LED zur Statusanzeige sowie einem zusätzlichem Bügel. Es eignet sich ideal für Industriemaschinen, Verpackungsanlagen, Textilmaschinen, HLK-Anlagen, Automatisierungssteuerungen und Motorsteuerungen sowie Anwendungen in Gebäuden. Aufgrund der Vielzahl von vorhandenen Produktstandards und Zertifizierungen geeignet für den internationalen Einsatz. Zudem können Sie detaillierte Informationen zu Materialinhalten, Umweltauswirkungen und Kreislaufwirtschaft erhalten, die Ihre Nachhaltigkeitsziele unterstützen.