Schneider Electric RXG22P7PV, EAN: 3606489562908

Schneider Electric RXG22P7PV relay 2 We 230 V AC

Industrial Material > Industrial relays and contactors > Industrial Relays

Schneider Electric RXG22P7PV relay 2 We 230 V AC

Lieske Part No. 1861893
Mfg Part No RXG22P7PV
EAN-Code 3606489562908
Manufacturer Schneider Electric
Here only 25,13 EUR
29,90 EUR incl. VAT

Further information for Schneider Electric RXG22P7PV relay 2 We 230 V AC

Complementary
status LEDWith
Electrical durability100000 cycles for NO resistive load at 55 °C; 100000 cycles for NC resistive load at 55 °C
[Ui] rated insulation voltage250 V conforming to IEC
Removable legendWith
Maximum switching voltage250 V
Drop-out voltage threshold>= 0.3 Uc AC
[Ie] rated operational current10 A at 30 V (DC) conforming to UL; 10 A at 30 V (DC) conforming to IEC; 10 A at 250 V (AC) conforming to UL; 10 A at 250 V (AC) conforming to IEC
Load current5 A
Minimum switching capacity50 mW at 10 mA, 5 V DC
Maximum switching capacity1250 VA AC; 150 W DC
Control typeLockable test button
Average resistance23500 Ohm at 23 °C +/- 15 %
Contact resistance100 mOhm
Insulation resistance1000 MOhm at 500 V DC
Electrical insulation classClass F
Mechanical durability10000000 cycles
Safety reliability dataB10d = 100000
Utilisation coefficient20 %
Operating time20 ms
Reset time20 ms
Contact terminal arrangementSeparate
Connections - terminalsConnector, 1 x 0.25...1 x 2.5 mm² (22 AWG...14 AWG) flexible with cable end; Connector, 2 x 0.25...2 x 1 mm² (22 AWG...17 AWG) flexible with cable end; Connector, 1 x 0.5...1 x 2.5 mm² (20 AWG...14 AWG) solid without cable end; Connector, 2 x 0.5...2 x 1.5 mm² (20 AWG...16 AWG) solid without cable end
Dielectric strength1000 V AC between contacts with micro disconnection; 1300 V between terminals and base with basic insulation; 3000 V between terminals and LTB area with basic insulation; 3000 V AC between poles with basic insulation; 5000 V AC between coil and contact with reinforced insulation
[Uimp] rated impulse withstand voltage1200 V AC between contacts with micro disconnection; 6000 V between coil and contact with reinforced insulation; 1500 V between terminals and case with basic insulation
Overvoltage categoryIII
Protection categoryRT I
Pollution degree2
Test levelsLevel A group mounting
Device presentationComplete product
Contacts materialSilver alloy (AgSnO2In2O3)
Shape of pinFlat (faston type)
Net weight0.065 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsIEC 61810-1; CSA C22.2 No 14; UL 508; IEC 61984
Product certificationsEAC; CSA; UL; CE; DNV
Ambient air temperature for storage-40…85 °C
Ambient air temperature for operation-40…70 °C
IP degree of protectionIP20
Relative humidity10…85 %
Vibration resistance3 gn, amplitude = +/- 1.5 mm (f = 10…150 Hz)in operation; 5 gn, amplitude = +/- 1.5 mm (f = 10…150 Hz)not in operation
Logistical informations
Country of originCN
Main
Range of productHarmony Electromechanical Relays
Series nameRXG series
Product or component typePre-assembled plug-in relay with socket
Relay typeInterface relay
Contacts type and composition2 C/O
[Uc] control circuit voltage230 V AC
[Ithe] conventional enclosed thermal current5 A
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height1.400 cm
Package 1 Width7.400 cm
Package 1 Length8.000 cm
Package 1 Weight63.000 g
Unit Type of Package 2BB1
Number of Units in Package 230
Package 2 Height9.000 cm
Package 2 Width17.200 cm
Package 2 Length27.300 cm
Package 2 Weight2.122 kg
Unit Type of Package 3S03
Number of Units in Package 3180
Package 3 Height30 cm
Package 3 Width30 cm
Package 3 Length40 cm
Package 3 Weight13.382 kg
Harmony Relay. Pre-assembled and ready-to-use interface relay RXG consisting of relay, base, protection module, retaining bracket and label plate. Number of contacts - 2, design - relay changeover contact, contact load capacity - 5 A each. Coil control voltage - 230 VAC. Mechanical position indicator - yes, LED display - yes. Test button for testing the contacts - yes, test lever for permanent switching for test purposes - yes, operation - tool-free. Plug-in base with screw terminals in separate arrangement for mounting on top hat rail or screwable onto mounting plate. Protection module - varistor. Plastic retaining bracket for fixing and easy removal of the relay. Label plate for identification. All components are assembled and ready for use and the pre-assembled relay can be used immediately.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1861893
qrcode für Schneider Electric RXG22P7PV relay 2 We 230 V AC